anybody have loads for the 168gr tsx

Reloadersnest is a great place to start.

http://www.reloadersnest.com/frontpage.asp?CaliberID=244

I've had very good luck with the TSX and the Hornady Interbond using Win brass, WLRM primers and Alliant's Reloder 19 powder.

just ordered some 168grain tsx be here in a few days hope to try them out this weekend if i find some load charts for them if anybody has some loads that I could try out that would be great.

With a middle bullet wt, these powders are excellent choices:

IMR or H4350
Re19, 22
Varget
H414
N560, N165

You should get close to or over 3000fps with any of these.

It looks at though you don't have a manual. The best powder for my 300SAUM is H4350 which is about same as the WSM. You do have a little more capacity so I will give the data from the Sierra Manual for the 300WSM.

168 gr bullet
H4350
63.5 gr is 2900 fps
Max load is 67.1 at 3050 fps

Varget also works good
56.1 gr is 2900 fps
Max load of 59.7 is 3050

Good Luck.

72.0grs of H4831sc under a 168gr TSX works wonders for a friends Browning A-bolt in 300wsm.

78 gr of Magpro for 3150fps out of a win 70 RMEF. It shoots way good .4 at 100 yrds.