THE ACCURATERELOADING.COM COMBINATION GUNS AND DRILLINGS FORUM

Go
New
Find
Notify
Tools
Reply
  
Brno zh344 question
 Login/Join
 
One of Us
Picture of JCS271
posted
A friend of mine just bought one (7x57) off of gunbroker. It seems to be a neat little rifle. He is still waiting on the ammo so (we Big Grin ) have not fired it yet. He is trying to figure out how to break it down and also how to adjust/ regulate the barrels if necessary. It did not come with an owners manual, we can not find one online or through BRNO. Any ideas! Any comments on the rifle itself?


"The difference between adventure and disaster is preparation."
"The problem with quoting info from the internet is that you can never be sure it is accurate" Abraham Lincoln
 
Posts: 1627 | Location: Montana Territory | Registered: 27 March 2010Reply With Quote
One of Us
posted Hide Post
PM Sent

Don


Life Member SCI &, NRA
 
Posts: 161 | Location: Reno NV and Betty's Bay RSA | Registered: 13 August 2006Reply With Quote
One of Us
posted Hide Post
Breakdown is the same as with the zh 100 and zh 200 series combo's that proceeded it - push the button on the hinge pin and take care with the extractor. When you can do assemble and disassemble them without a blood blister you have attained nirvana lol
 
Posts: 46 | Location: Australia | Registered: 27 February 2009Reply With Quote
One of Us
posted Hide Post
If it is like the ZH105, first you remove the screw that holds the extractor in place and slide out the extractor. You don't have to remove the extractor but it gives you a little more leeway in working on the gun. To break down, open the action, remove the extractor, push in the takedown button and pull the barrels straight up. The reassembly flies in the face of all other assembly in that you don't hook the lugs over the pin. You keep the receiver and barrels parallel and slide the action down over the barrels until the receiver touches the takedown pin, push in the pin, and keep pushing the receiver on to the barrels until it closes. I did it a couple times and got better each time. The third time I left the extractor in place and did it just as well.


Quick, Cheap, or Good: Pick Two
 
Posts: 2177 | Location: Tennessee | Registered: 18 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia