Does anybody have any good loading data for the 9.3x62mm & 9.3x64 Brenneke?

About the only powders I have to work with here in Australia are the following;

ADI Powders
AR 2206 (Rx 12?)
AR 2208 (Varget)
AR 2209 (H4350)
AR 2213 (H4831)

Winchester Powders
748
760
WMR?

Thanks

Rich- You'll find alot of useful loading data on both these cartridges using 748 and 760 on this web site. I shoot both these rounds myself, but use mainly Re-15 and Norma powders. Good shooting!

ricciardelli

[ 11-06-2003, 07:01: Message edited by: Metrix ]

I've worked with numerous powders for the 9.3x62 - I now use ONLY H414, which is very similar to 760, so I imagine that you will have good results with that powder as well.

I have loaded and shot both of those rounds for years, and settled on RL-15 and H414, still can't decide which is best...

RichieRich
I shoot the two calibers and reload both, but I have only one reload with yours powders: 9,3 x 64 Brenneke: RWS cases, RWS 5341 primers, WW-760, 81 grains, RWS 247 grs Cone Point bullets (with molybdenum), O.A.L. 87,30 mm; Velocity: 2.773 fts. with 26" barrel.
Hector C. Roveda

Richie,

the only powder I have used to date is AR2208 works fine in my rifle and is easily obtainable.