THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Factory ammunition for the 300 H&H

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Factory ammunition for the 300 H&H
 Login/Join
 
One of Us
posted
So far I have found Federal..180gr Noslers and 180gr Barnes, and Winchester 180gr Failsafe...

Are there any other sources for factory ammunition for the 300H&H?


Sendero300>>>===TerryP
 
Posts: 489 | Location: Texas, USA | Registered: 25 December 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
I think that's about it.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
posted Hide Post
Any factory ammo that would load with a round-nose bullet?
 
Posts: 871 | Location: Michigan | Registered: 17 March 2003Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Doublegun:
Any factory ammo that would load with a round-nose bullet?


Once a upon a tiame, both Win and R-P loaded 220 gr Round nose, but now it's a 180 gr only.


Remember, forgivness is easier to get than permission.
 
Posts: 3994 | Location: Hudsonville MI USA | Registered: 08 June 2000Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Doublegun:
Any factory ammo that would load with a round-nose bullet?

I have found 200 virgin brass.....want some 220 round noses?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
I was told by Federal they would soon have another 180 grain loading. I believe it was the X bullet or TBBC. Sorry I can't remember which.
 
Posts: 3073 | Location: Pittsburgh, PA | Registered: 11 November 2004Reply With Quote
new member
posted Hide Post
Try www.midwayusa.com, They have almost everything currently available.
 
Posts: 19 | Registered: 24 February 2005Reply With Quote
One of Us
posted Hide Post
I believe that RP dropped their .300 H&H loading. I have several boxes of RP 180 gr Core-Lok's and they work pretty well. Though I use my own NP handloads for hunting.

FN in MT


'I'm tryin' to think, but nothin' happens"!

Curly Howard
Definitive Stooge
 
Posts: 350 | Location: Cascade, Montana | Registered: 26 October 2005Reply With Quote
one of us
posted Hide Post
Check into the Nosler Custom Ammo.
 
Posts: 1324 | Registered: 17 February 2004Reply With Quote
One of Us
posted Hide Post
I double checked and Federal is showing both the Nosler Partition and the Barnes TSX.
 
Posts: 3073 | Location: Pittsburgh, PA | Registered: 11 November 2004Reply With Quote
One of Us
posted Hide Post
Kynoch loads 180&220 grain soft/solids.



 
Posts: 3974 | Location: Vell, I yust dont know.. | Registered: 27 March 2005Reply With Quote
one of us
Picture of JLHeard
posted Hide Post
http://www.noslerammunition.com/300HH.html

Nosler Custom Ammo has 10 different loads for the .300 H&H, including my favorite, the 200grn Partition.


It is not enough to fight for natural land and the west; it is even more important to enjoy it...So get out there and hunt and fish and mess around with your friends...

- Edward Abbey
 
Posts: 580 | Location: Mesa, AZ | Registered: 11 May 2001Reply With Quote
One of Us
posted Hide Post
Yes, Nosler does offer it!! I didn't look through the Nosler site well enough...interesting.

Pondoro, I also found the Kynoch site
Kynoch
...they have the .300HH loaded down quite a bit. I'd still like to try a few rounds ...


Sendero300>>>===TerryP
 
Posts: 489 | Location: Texas, USA | Registered: 25 December 2004Reply With Quote
One of Us
posted Hide Post
I believe that Romey in Germany load it, probably i nthe same bullet style and weight as Kynamco.

The ammo made for H&H was at one time loaded by Romey for them so you could try H&H in new York and see if they have any in stock, it will be expensive however when compared to regular factory amm. Make sure you specify belted if you place an order though as they stock loads for both the flanged and the rimless.
 
Posts: 343 | Location: York / U.K | Registered: 14 April 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Factory ammunition for the 300 H&H

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia