The Accurate Reloading Forums
Info required on Mauser Type A

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/9811036571

29 May 2012, 17:12
401Nitro
Info required on Mauser Type A
I recently got hold of an Oberndorf sporter Type A, in 30-06 it has the S/N 118068, there are both British BV BP and BNP and German proofs BUGN proofs on the receiver and barrel.

Also interesting is that it is a single square bridge action with no thumb slot cut out.

Anoyone who can give me some more information on this rifle.

All serial numbers match including on the cross-bolt attached below are some pictures.


















29 May 2012, 22:37
Huvius
Nice rifle!
Made in 1937.
Sure this isn't a magnum length action? From the location of the crossbolt it looks like it could be. I know, strange on a 30'06 but there were some othe TypeA's in that number range with square bridges and solid walls built up as 404's.
I am jealous...
30 May 2012, 06:55
401Nitro
Huvius it is strange that you talk of a 404 as there is a 404 stamped on the underside of the action, the underside of the barrel is marked as 7.62x 63 BNP with the crown over it, other British proofs are the BV and NP proofs.
It came from a gun shop in India where there was also another type A in 30-06 which was lighter but modified for a scope mounting so had the bolt bent, this was much lighter than the one I have posted pictures of.
30 May 2012, 18:11
manhasset
How many rounds does it hold ? looks like a extended magazine box.
Bob
30 May 2012, 18:14
401Nitro
Five rounds Bob, hove not pushed it any further as I do not want to weaken the follower spring
04 June 2012, 01:16
tjroberts
that is very nice.
In a great chambering too.
Even back then the springfield, as most europeans call it it was to beknown good.
With those nice looking express sights and my eyes i am not sure i could shoot barn wall from rhe inside. but i could be wrong...tj3006