Go | New | Find | Notify | Tools | Reply |
One of Us |
The definition of point blank range I use is the distance at which the path of the bullet will be with +/- 3†of the line of sight from muzzle to the point blank range. Can someone give me the approximate point blank ranges of each of the following loads: 286gr 9.3x74R 225gr .338 Win Mag 250gr .338 Win Mag 196gr 8x57IRS 196gr 8x75RS I am guessing that the 9.3x74R and 8x57IRS are about 175 to 200 yards and the .338 Win Mag and 8x75RS are about 250 to 275 yards, but would appreciate accurate information. Brazos Jack | ||
|
One of Us |
I cannot tell you what it would be with .338 or 8mm, but the 9.3x74 286gr with velocity 2300fps would be 225yds with a spitzer and 200yds with a round nose. This assumes about +/-2.5" or a 5"circle. Looking at data for my 8mm-06, I'd say your estimate for the 8x57 is a good one. Assuming a BC of about .500 for the 250gr .338, you would be within a 5" circle out to 275yds. I think the 225 grain would be slightly less because of lower BC. I am totally unfamiliar with the 8x75RS; however, if you can get mag performance out of it, it should duplicate or come close to duplicating the .338 performance. Kudude | |||
|
One of Us |
norma factory loads: 9.3x74R 286gr oryx 232yds .338wm 225gr a-frame 274yds 8x57irs 196gr oryx 235yds couldn't find the other two you asked for on http://www.norma.cc/default.asp?Lang=2# | |||
|
One of Us |
Thanks guys, Action type aside, I think the .338 Win Mag is the best balanced “do everything†cartridge for North American conditions. From Alaskan browns in thick cover to antelope or mule deer at long range. I just wish there was a popular, readily available rimmed version of it for drillings, doubles and traditional single shots. I would agree that for double rifles the 9.3x74R is just as good. Because even the best doubles practically never have regulation that a sportsman would rely on for a right/left group on game beyond the point blank range of the 9.3x74R. I would like a round with the all the capabilities of the .338 for drillings like Krieghoffs with independent non-soldered rifle barrels. I think the 8x75RS would do it, but realistically from a commercial factory ammo point of view it almost doesn’t exist. It’s almost like the old 5mm Remington Rimfire Mag – you can find rifles, but not ammo. Brazos Jack | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia