THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Rebarreling 1 of 3 M70s to .300 H&H. Opinions?

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Rebarreling 1 of 3 M70s to .300 H&H. Opinions?
 Login/Join
 
new member
posted
It's been a long time since I was here last - I posted this thread back in 2002.

Anyhoo, here's what's going on: Sometime back I had one of the popular semi-custom rifle builders build me a "safari" style .375 H&H on a left-hand Model 70 originally in .300 WM. He had to open up the ejection port and magazine box, and the work was very well done. While I was waiting for it, I managed to get my hands on 2 actual left hand Model 70 Safari Expresses, both in .375 H&H, so now I have 3.

It turns out I don't care for the custom gun. It's too light. This particular builder specializes in light rifles, and it's as heavy as he would make it. I don't blame him - it was just a poor choice of rifle builder on my part (in regards to weight; the quality of the work is fine).

So, lately I've been thinking of setting up these rifles as an all-the-same-action 3-gun battery: a .30, a .375, and something big, like a .458. I thought the custom gun would be the right one to use for the .30. I'm leaning toward the H&H for 2 reasons, 1) It's now a long action 2) I don't want or need Magnum power, so I would download it to about .30-06 level (I would rather have a .30-06, but that would mean more conversion work, or another new gun).

So - anybody have any thoughts on this? Which .300 downloads easier, H&H or WM? Can a controlled feed M70 be redone in a smaller head size (.30-06)?

I already have a good, plain .30-06 (the one I used in the thread I linked). Thanks!
 
Posts: 3 | Registered: 06 January 2006Reply With Quote
One Of Us
Picture of KWard
posted Hide Post
I have a pre 64 Model 70 in .300 H&H and I just love it. The H&H loads so well and feeds like a dream. I handload and you can go from any 30.06 load to any .300 magnum level you want except the weatherby level. My chicoe and I also have a model 70 in .300 win mag is still the H&H. My 2 cents, I like your battery idea. Good luck
 
Posts: 319 | Location: Arizona | Registered: 31 January 2004Reply With Quote
one of us
posted Hide Post
I agree with KWard. Go with your impulse and get the 300 H&H. I have two and altough I haven't shot them much recently because I've been otherwise occupied, I have shot the hell out of both of them in the past and they're some of my favorite rifles.
 
Posts: 852 | Location: Austin | Registered: 24 October 2003Reply With Quote
One of Us
posted Hide Post
I don't have a .300 H&H but my next door neighbor/hunting partner, does. His is a pre-'64 Win. 70.

He loves it, and has killed several bull elk, Mule and whitetail deer, plus one Black bear.

He has other rifles, but that's the one he favors over all the others.

FWIW. L.W.


"A 9mm bullet may expand but a .45 bullet sure ain't gonna shrink."
 
Posts: 349 | Location: S.W. Idaho | Registered: 08 January 2005Reply With Quote
one of us
Picture of fredj338
posted Hide Post
The perfect travelling companion to a .375h&h for Africa. The 3rd one should go .458Lott or is, like me you don't like that much recoil, go .416rm.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
turning a magnum into a .30-06 is difficult if it can be done at all.....Trade it first because it's cheaper.

I agree with Fredj338.....go the 416 route.

RE: the .300 H&H from a .375 that is too light.
It's grand old cartridge that'll put kudu in the freezer as fast as anything.....I'd say that's a great idea.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
JJ,
rather than modifying an existing 375 HH into something smaller, why not just trade with me? I have a LH Win 70 in 300WM that is like new, and maybe what you think is is too light I might love....just an idea, if you are interested, PM or email me....if there is interest, we can talk more.

Low_tech
 
Posts: 484 | Location: SLC, UT | Registered: 01 March 2003Reply With Quote
new member
posted Hide Post
Thanks, but no thanks, low_tech.

Anybody have any sizing/headspacing issues with the H&H's sloping shoulder?
 
Posts: 3 | Registered: 06 January 2006Reply With Quote
one of us
posted Hide Post
I love the 300 H&H and intend to build my next one by rebarreling a 7mm STW Classic Model 70. It will load down to 30-06 level beautifully. Just run it at starting loads or a little more and you have a 30-06 and usually very good accuracy.
 
Posts: 400 | Location: Murfreesboro,TN,USA | Registered: 16 January 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by JJohnston:
It's been a long time since I was here last - I posted this thread back in 2002.

Anyhoo, here's what's going on: Sometime back I had one of the popular semi-custom rifle builders build me a "safari" style .375 H&H on a left-hand Model 70 originally in .300 WM. He had to open up the ejection port and magazine box, and the work was very well done. While I was waiting for it, I managed to get my hands on 2 actual left hand Model 70 Safari Expresses, both in .375 H&H, so now I have 3.

It turns out I don't care for the custom gun. It's too light. This particular builder specializes in light rifles, and it's as heavy as he would make it. I don't blame him - it was just a poor choice of rifle builder on my part (in regards to weight; the quality of the work is fine).

So, lately I've been thinking of setting up these rifles as an all-the-same-action 3-gun battery: a .30, a .375, and something big, like a .458. I thought the custom gun would be the right one to use for the .30. I'm leaning toward the H&H for 2 reasons, 1) It's now a long action 2) I don't want or need Magnum power, so I would download it to about .30-06 level (I would rather have a .30-06, but that would mean more conversion work, or another new gun).

So - anybody have any thoughts on this? Which .300 downloads easier, H&H or WM? Can a controlled feed M70 be redone in a smaller head size (.30-06)?

I already have a good, plain .30-06 (the one I used in the thread I linked). Thanks!


Do we really need another .300 H&H to the crowd Eeker? YES WE DO!. You would love the H&H above them all once you have one...trust me cheers


DRSS: HQ Scandinavia. Chapters in Sweden & Norway
 
Posts: 2805 | Location: Denmark | Registered: 09 June 2005Reply With Quote
one of us
posted Hide Post
Just picked up a pre-64 M70 in .300 H&H last week. The gun needs a little TLC but is mechanically sound. I am still contemplating how to scope it, probably a Leupold 4X or vintage Lyman Alaskan. As for loading it down to a .30-06, sounds practical - but what would I do with my .30-06?
 
Posts: 871 | Location: Michigan | Registered: 17 March 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Rebarreling 1 of 3 M70s to .300 H&H. Opinions?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia