THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: WHY I SHOOT WEATHERBYS
 Login/Join
 
One of Us
Picture of jorge
posted
DJ: Well, your post is the perfect example as to why I frequent here. I actually learn stuff!Thanks for pointing that out. I must admit though,all this knowledge costs me a lot of money.....so my wife says anyhow! jorge
 
Posts: 7149 | Location: Orange Park, Florida. USA | Registered: 22 March 2001Reply With Quote
one of us
posted Hide Post
75% smaller image available here:Daisy billboard
 
Posts: 338 | Location: Johnsburg, Illinois | Registered: 15 December 2002Reply With Quote
One of Us
Picture of jorge
posted Hide Post
Reloader: all the loads here are "factory equivalent" loads out of the Weatherby Guide. All shoot less than MOA out of my rifle AND to the same POI as factory stuff. All Fed 215 primers norma brass and hornady bullets unless specified otherwise:

139gr 74.1gr MRP
140gr Nosler Solid Base & Partition 74.1 MRP
154gr 71.0 MRP Same as 175gr
160gr Partition 71.8 ( go figure)
175gr 71.0 MRP

I've shot all of these with good results and no pressure signs. Conventional wisdom says RL-22 is the same as MRP. As always proceed with caution. jorge
 
Posts: 7149 | Location: Orange Park, Florida. USA | Registered: 22 March 2001Reply With Quote
one of us
Picture of Reloader
posted Hide Post
Jorge, I will be starting soon on a Mark V 7mm Weatherby Mag project.

Do you have any accurate load combos on that cart?

Thanks,

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia