THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Bolt Replacement
 Login/Join
 
One of Us
posted
I have a new rifle with a semi-arc cut on the end of the bolt that appears to line up with the outside edge of the chamfer on the chamber. (I hope the description is clear enough). I contacted the manufacturer and they will send a new bolt to install.

Is this OK; I thought the bolt was hand fitted on each rifle. Is this incorrect?
 
Posts: 37 | Registered: 29 March 2009Reply With Quote
one of us
posted Hide Post
One should check the new bolt with head space gages. If it head spaces it is useable the way it is.

Iam really surprise that now days some one would just send you a bolt. Most require the firearm be sent back to have it fitted.
 
Posts: 19736 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Iam really surprise that now days some one would just send you a bolt. Most require the firearm be sent back to have it fitted.

agreed unless it's a Savage and the customer is known to have a barrel wrench and can and has adjusted headspace regularly.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia