Which USA supplier is best to direct enquiries to for a magazine for .375 H+H ? EuroOptic lists very few Blaser R93 parts now the model is discontinued.
Thanks to all who might help.

look on blaserpro.com

Or BlaserBuds.com

Thankyou for the replies.
In the original post I didn't explain that I need another mag because the original I have no longer holds inserted cartridges. I can put three down, carefully, but seconds later they just pop out again. It looks like there is wear on the mag lips and with the bottom springs pressure they are not holding cartridges securely.
Blaserpro didn't seem very active, or useful, unfortunately.
BlaserBuds...maybe. I'll look again when I have more time.
Meanwhile I remembered I have the magazine pictured in the link. It was worth a go to see if it worked OK, which it did, happily. Accepted .375 H+H nicely and they cycled through perfectly. This will get me by until I find a replacement .375 H+H mag.

https://drive.google.com/file/...-5e/view?usp=sharing

Online I did find Mad Dog but they seem spendy !

I would check registered Dealers on Blaser Website. They should be able to get this inlay without problems. If they don't want to help I might would complain to Blaser directly.

In Europe it will be very easy to get. If you really struggle to get it in the US, let me know.

Thanks Gerac
I will keep your offer in mind. Hopefull I get it sorted via USA suppliers or closer to home.
Cheers

06, Blaser magazines are pretty forgiving....one magazine can handle a number of different calibers. You may be OK with the one you're using.

Thanks Biebs
I think you are probably right. I'll be using it again at the range to confirm or otherwise but from the single range session so far it seems to work no differently to a mag inscribed for .375 H&H.