THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
286 grain Hornady 9.3 bullets
 Login/Join
 
One of Us
Picture of Dave Bush
posted
There is another thread dealing with the 285 grain Privi bullets and I didn't want to hijack the thread. I was wondering if anyone has used the 286 grain Hornady 9.3 bullets and, if so, how well did they work? I have always had good luck with Hornady's spire points on deer and such.


Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).
 
Posts: 3728 | Location: Midwest | Registered: 26 November 2006Reply With Quote
One of Us
Picture of Rick R
posted Hide Post
I've used them since they were introduced, IMHO the cannelure is set too short for the x62 in a .30-06 length magazine, but I just seat them long.

I get groups of about an inch at 100 yards and knocked down the biggest white tail deer I've ever shot with one a few years ago. But WTD aren't a real test for a 286 grain .366" bullet. Wink

When Midway came out with some "blems" that looked suspiciously like the Hornady bullet, I bought several hundred and figure I'm fixed up for some time to come. Big Grin
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
one of us
posted Hide Post
I have shot one pig with a factory Hornady 286 9,3x74R.

The shot was about 35 yards. The bullet gave complete penetration, with good internal damage, but did not appear to have a lot of fragmentation.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
one of us
posted Hide Post
I purchased several boxes when they were introduced and have loaded them in both the 9.3x62 & 9.3x74R.

I have no issue with the location of the cannelure, used a Lee Factory Crimp Die for both cartridges - right to the top of the cannelure and Crimp-o! Works just fine IMO.

I used both rifles, the R93 for driven Wild Boar & the Drilling for Stand Hunting this season and although not exactly scientific my season's total encompassing Fallow, Red Deer & Wild Boar (@30 animals) allow me to conclude Hornady's 9.3 bullets perform just they way they're advertised; for me at least there was no drama, no stress involved in their use.

Both rifles are sighted-in at 100 meters and the loads are <1"; and would be a long-g-gish shot the way I hunt; most range from spitting distance to 50-60 meters.

When this batch is depleted I'll switch to Nosler Accubonds to replace my beloved Ballistic Tips and load them to the cannelure as well; also no issues.

I've used Speers, Woodlieghs, Nosler, Hornady & PMP's; they all have their place but when all is said & told I prefer the old fashioned blunt-nosed 286 gr. PMP's.

Honestly, there aren't ANY bad 9.3 bullets on the market today that I can think of.


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
one of us
posted Hide Post
I have used it for the past year and have found that for red deer and wild boars is a great bullet. For this game I do not need anything better in Poland


Regards
Pawel
 
Posts: 45 | Location: Poland | Registered: 26 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia