THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
338 edge
 Login/Join
 
new member
posted
Any one shoot this cal. What loads and bullets. Thinking about getting one. Would like to run 300 gr.
 
Posts: 18 | Location: NW Oklahoma | Registered: 14 January 2010Reply With Quote
One of Us
posted Hide Post
I'm useing 300 grains SMKs in my 'Edge, with 91 grains of H1000. Velocity is almost exactly 2800 fps. I've loaded hotter but found slightly better accuracy at 91, along with better brass life.

Friends with the same caliber ended up with the same powder and bullet, plus or minus a grain. The Berger seems to want to shoot too.

One thing about the H1000 load, changeing teperatures don't do much to the velocity. Some of the other options will drive you insane.
 
Posts: 1928 | Location: Saskatchewan, Canada | Registered: 30 November 2006Reply With Quote
One of Us
Picture of thecanadian
posted Hide Post
I shoot 265gr Barnes TTSX with 92.3gr of H1000. 5 shot groups under 1 inch at 350yds. I haven't tried the Bergers but the SMK's didn't shoot that well.


"though the will of the majority is in all cases to prevail, that will to be rightful must be reasonable; that the minority possess their equal rights, which equal law must protect, and to violate would be oppression."

---Thomas Jefferson
 
Posts: 1093 | Location: Eau Claire, WI | Registered: 20 January 2011Reply With Quote
one of us
posted Hide Post
91grs of H-1000 is the load mine likes as well with 300gr SMK's. Mine hovers around 2800fps as well.


Guns and Diesel trucks what more could a guy want?
 
Posts: 179 | Location: Boise, ID | Registered: 16 February 2004Reply With Quote
One of Us
posted Hide Post
Mine is a real POS that won't shoot anything consistantly............I hate that rifle.

91 grains of H1000 locks the bolt?????

Best ( not great ) has been retumbo and 250g machkings.

That rifle would make a great tomatoe stake!


.
 
Posts: 42464 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
One of Us
Picture of Rub Line
posted Hide Post
I nearly built one of these but decided against it, went with a 338wm instead. I'm just wondering, how much real world velocity improvement is there between the edge and the 338 RUM? Not just ballistic tables but actual chronographed loads?


-----------------------------------------------------


Do not answer a fool according to his folly, or you yourself will be just like him. Proverbs 26-4


National Rifle Association Life Member

 
Posts: 1992 | Location: WI | Registered: 28 September 2007Reply With Quote
One of Us
Picture of thecanadian
posted Hide Post
quote:
Originally posted by Rub Line:
I nearly built one of these but decided against it, went with a 338wm instead. I'm just wondering, how much real world velocity improvement is there between the edge and the 338 RUM? Not just ballistic tables but actual chronographed loads?


Depends on barrel length. I cant speak for others, but my 338 edge has a 30in barrel. Most factory 338RUM are considerably less, probably 26in. I just chronographed some 300gr Berger's today with an average of 2961ft per sec.These rounds shoot great, .76in groups at 350yds.


"though the will of the majority is in all cases to prevail, that will to be rightful must be reasonable; that the minority possess their equal rights, which equal law must protect, and to violate would be oppression."

---Thomas Jefferson
 
Posts: 1093 | Location: Eau Claire, WI | Registered: 20 January 2011Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
quote:
Originally posted by JTEX:
Mine is a real POS that won't shoot anything consistantly............I hate that rifle.

91 grains of H1000 locks the bolt?????

Best ( not great ) has been retumbo and 250g machkings.

Must be a Remington...

That rifle would make a great tomatoe stake!


.


****************
NRA Life Benefactor Member
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
One of Us
posted Hide Post
quote:
Must be a Remington...


What's your point?

I have several Remingtons that shoot great.

The action is bedded in a McMillan stock with a Krieger barrel.

Do you have any thing intelligent to add?

.
 
Posts: 42464 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
one of us
posted Hide Post
That's too bad JTEX. Mine has a Krieger 9.35 twist and it shot a .282" 4 shot group a couple weeks ago. It was built on a Remington action with the lugs lapped and no other truing done. A buddy of mine has built 4 or 5 of them with Krieger 9.35 twist barrels and every one was a 1/4 to 3/8" gun. He shot 89grs of H-1000 in his with the same velocity I'm getting with 91grs, 2800+fps.


Guns and Diesel trucks what more could a guy want?
 
Posts: 179 | Location: Boise, ID | Registered: 16 February 2004Reply With Quote
One of Us
posted Hide Post
Paitently waiting for my new 338 RUM 34" 3 groove Nitrided barreled Savage F class platform. Computer says 3000 fps with 300 Bergers. Strictly a long range gong ringer as hunting (IMO) is all about getting a close as you can, and 15 pounds is not a "walk about" rifle.
 
Posts: 801 | Location: Pinedale WY USA & Key West FL USA | Registered: 04 February 2011Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia