THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    200gr Accubond velocity in a 300 Win Mag??

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
200gr Accubond velocity in a 300 Win Mag??
 Login/Join
 
One of Us
posted
What velocity could I expect with loading noslers 200gr accubond in my M70 classic?
I'm hoping that I can end up with a "one load" does all situation from small game to large.
From what I can seen on the forums it looks like I should be able to get a 200gr bullet doing what a factory 180gr load would do normally with a whole heap more energy delivered on target.
 
Posts: 133 | Registered: 25 August 2006Reply With Quote
one of us
posted Hide Post
Expect 2900 fps. If you happen to have a "fast" barrel, you might squeeze out nearly 3000 fps without excessive pressure. Rifles will vary, but with a 24" barrel, you should end up somewhere between these two figures. Try IMR 7828 or RL-25.
 
Posts: 13266 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
posted Hide Post
I developed a load last fall for 200 gr Partitions in a Win classic with a 24" factory barrel in 300 Win Mag. Using Fed 215 mag primers and 82.5 to 83.0 grains of Retumbo, I got an average of 2990 fps. Range was about 2975 to 3015 and I got better velocity at this load range than the max listed of 84.0 grains from Hodgdon. Accuracy was under MOA out to 400 yards. Hope this helps.
 
Posts: 136 | Location: mn | Registered: 03 June 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    200gr Accubond velocity in a 300 Win Mag??

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia