The Accurate Reloading Forums
Stainless 35 Whelen?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/736106043

27 September 2005, 04:22
AMRA
Stainless 35 Whelen?
I have my stainless Weathrby 30-378,My stainless Browning BLR 270 WSM,and my Winchester model 1895 405 wcf.I have always been a Brett Farve fan so I would like to add a 4th rifle to the mix to make it complete.What would make the best Brand rifle to make a 35 Whelen out of?
27 September 2005, 05:25
jb747
Who's Brett Farve?

In a local gunshop yesterday, and they tell me that the Remington XCR is available in 35 Whelen (and not the CDL as their catalogue states). I'm about 90% decided on ordering one.
27 September 2005, 06:08
stiffknees
Mine is on a Savage 110 left hand action with 1:12 twist. It shoots all bullets well with very little load tinkering. The best action would be any 30-06 sized action youfind acceptable.
27 September 2005, 08:52
RMiller
I can only find the 35 whelen listed in the CDL from remington.

I have actually seen the CDL in 35 whelen. So I know they do make it in that model.

The XCR would be good for the 35 Whelen though.


--------------------
THANOS WAS RIGHT!
27 September 2005, 09:08
ElCaballero
mauser 98 forget the stainless.


As a general rule, people are nuts!
spinksranch.com
27 September 2005, 09:25
rembo
I too, have handled a CDL in a Whelen, local shop had two, one left.

I built my Whelen on a 700 action with a stainless barrel in an HS stock...works well.
27 September 2005, 14:28
Virginia7
quote:
Originally posted by jb747:
Who's Brett Farve?


You're kidding, right? Okay, yeah, I know he mispelled it, but .....

Brett Favre #4
Position: Quarterback
College: Southern Mississippi
NFL Exp: 15 Seasons
Packers Exp: 14 Seasons
Ht: 6' 2"
Wt: 222 lbs.
Age: 35
Aquired: Trade 1992 (Atl)
Status: Active Roster
Link: http://www.packers.com/team/players/favre_brett/

Just one of the finest QB's there is. Of course, I always liked the Broncos, and John ?
what's his name (ha,ha).

As for the 35Whelen, check out the Winchester Featherweight Classic in stainless steel. Install a 35cal. barrel with 1:12 or 1:14 twist, mount a Leupold VXIII 1.5-5x scope, and you're set.
27 September 2005, 14:38
p dog shooter
Ruger MKII
27 September 2005, 17:10
jb747
I can only hope my gunshop is correct about the Whelen in the XCR. They were on the phone to the importer at the time, but that probably doesn't mean much...

As for Brett Favre. What's a quarterback? Must be some strange sport that you yanks follow.
27 September 2005, 23:02
AMRA
Sorry about the spelling Frowner FAVRE !Thats how they teach to spell in L.A.(Lower Alabama}jb747 I hope you are right about the XCR being available in 35 whelen It would save me the trouble of finding somebody to build me one.Gotta go now me and the MRS. are collecting clothes,food stuff,for the Hurricane Katrina families that are being housed in our old Fort Mac.I think my wife said we have a little over 600 families staying out at the old fort.Later AMRA
28 September 2005, 04:54
dougw1969
quote:
Originally posted by ElCaballero:
mauser 98 forget the stainless.


How about forget the Mauser and work with a stainless 700. If you use the same barrel and stock the gun built on a long 700 will be almost a half pound lighter than a M98.


We didn't inherit the land from our fathers, we're borrowing it from our children.
28 September 2005, 17:58
Thomas Jones
My Whelen is on amauser 98, No Complaints, i used the Adams an bennet kit from moidway. I think The barrel is on sale for 89.00.
I have a springfield I might make another whelan on, seems like thats the classic one, but a model 70 classic would be pleasing too. i would opt for a blue one myself, but to each there own...tj3006


freedom1st