THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Kimber 89 Bgr?
 Login/Join
 
one of us
Picture of Marterius
posted
My gun dealer has a Kimber of Oregon 89 Bgr in 30-06, second hand, mint condition, that have been standing there for a while. In particular I like the stock, a reddish warm color, but I also like the idea of a CRF of the good old style. They are rather uncommon in Sweden, and this one is priced a little below a similar Sako 75 (which are very common here) which means about $1.300 in the current exchange rate.

The serial number is 3170. The only drawback I can notice is that the safety did not work as silent as I would like but that is a matter of learning how to operate it.

Now I understand that Kimber guns have had their ups and downs, but I don't know what models or years to look out for. I should very much appreciate any input!

Regards,
Martin
 
Posts: 2068 | Location: Goteborg, Sweden | Registered: 22 May 2002Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
Marterius, most BGRs were very well made. I have owned a few of them and was very impressed. I only sold them because someone wanted to pay me more than I wanted to keep them. Value depends on the model. $1,300 USD is average for a 30-06 deluxe. Super America well run more as well as rare calibers. Although I am a hardcore Sako fan, but I would buy a Kimber BGR before a Sako 75 any day of the week. Do you know the model? Does it have integral square bridge scope bases, or are they drilled and tapped? Lou
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
one of us
Picture of Marterius
posted Hide Post
Thank you very much for the information! It is drilled and tapped and fitted with two piece Millett bases.

Regards,
Martin
 
Posts: 2068 | Location: Goteborg, Sweden | Registered: 22 May 2002Reply With Quote
<eldeguello>
posted
A friend of mine has one in .416 Rigby. It is beautiful, well made, and rare in that caliber!
 
Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
Marterius, it sounds like a deluxe. Anywhere between $1000 and $1300 would be a fair price. In the states, $1300 would be on the high end. Look on www.gunsamerica.com under Kimber of Oregon and look for M89 BGR deluxe and compare. Lou
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
one of us
Picture of Marterius
posted Hide Post
Thanks Doctor!

As to the price, just a few months ago the price would have been $ 1000, the dollar are rather weak compared to the Swedish currency at the moment...

It would perhaps have been a good affair to import a gun from USA, if it was not for the paperwork...

/Martin
 
Posts: 2068 | Location: Goteborg, Sweden | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
So Martin, are you going to get it, or are you still dithering?? Hey come on, why should we be the only ones wasting money on toys we don't *strictly* need Get it and tell us how the thing shoots. It will be *just* the thing for your next moose season, believe me!
- mike
 
Posts: 6653 | Location: Switzerland | Registered: 11 March 2002Reply With Quote
one of us
posted Hide Post
Btw, you US gun wheelers and dealers, is this BGR Super America overpriced??

BGR at Cabelas

Nice looking toy, if you ask me.
- mike
 
Posts: 6653 | Location: Switzerland | Registered: 11 March 2002Reply With Quote
<JOHAN>
posted
Marterius



I have seen some of them that came to Sweden and they are not near the quallity of a good mauser. I think the rifle you have been looking on is the same as I have seen



Some have trouble with the feeding and the magazines.



I have seen a few the Kimbers are poorly built and spare part are hard to come across. Kimbers are not well sought rifles in Sweden and the price should be a bit lower.



/ JOHAN
 
Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
MHO, $1995 is a little high for a 95% rifle. However, for a Super America in 280 you're looking at least $1400+. Lou
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
one of us
posted Hide Post
Thanks Lou. Nice wood though - good that I don't have any $$$ left
- mike
 
Posts: 6653 | Location: Switzerland | Registered: 11 March 2002Reply With Quote
one of us
Picture of Marterius
posted Hide Post
I have made up my mind, and I will not get this one. I have searched on the model in older posts here, and found some AR-member having great trouble with their BGR:s, in particular one also i 30-06 with a serial number close to this one.
Further, I was talking to JOHAN on the phone the other day, and he almost made iit sound as if it was a Blaser...

I can only congratulate Dr. Lou for being lucky with his BGR:s!

So I will go on and I have decided that my next project will be to make my own stock. I had an idea of bulding it on a Husqvarna 98, fixing it up with M70 saftey and stuff, but my latest idea is to build it on an old Sako. A Forester or a Finnbear from the sixties. A stock in classical American design and with with good bedding etc. I have never done it befor, but I think it could be really fun!

Regards,
Martin
 
Posts: 2068 | Location: Goteborg, Sweden | Registered: 22 May 2002Reply With Quote
<JOHAN>
posted
Quote:



Further, I was talking to JOHAN on the phone the other day, and he almost made iit sound as if it was a Blaser...



Regards,

Martin






Martin, blaim it on me It have saved you a lot of money and problems. Now, what is it they say about NOT shooting the messenger



Why not pick the mauser project, a nice classic gun. Perhaps you are considering a R-93 blaser with a lovely "wannabe" stock from a synthetic three Don't try to shape it or treat it with any oil to improve the luster.... It will make a nice contrast to you old betsy S/S



You can buy an inletted valnut blank were most of the exterior is made. The choice of grades are large and the price is not that bad. They got a nice classic pattern and a english one.



/ JOHAN
 
Reply With Quote
one of us
Picture of Marterius
posted Hide Post
No Johan, no Blaser for me.

I am very satisfied with my Sako Vixen and I think I could do well with a bit heavier rifle build on the same kind of action.

Regards,
Martin
 
Posts: 2068 | Location: Goteborg, Sweden | Registered: 22 May 2002Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
Marterious, I have see a couple of BGRs that look like they were put together by a freshman in shop class, but most of them are first class. Also, I have never shot one so I don't know how they shoot. Overall I think they're fair investment if you find a nice one at a good price. It should hold its value. Nevertheless, you definitely won't go wrong with the Sako. Lou
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
<JOHAN>
posted
Marterius
I was just testing soo you haven't gone crazy. I doubt you are the typical blaser buyer
Look well at gun shops, auctions etc. I bought a sako L61R in 9,3X62 two years ago. The stock was nothing to brag about and it was badly treated. But the action and barrel was fine. It is now re-stocked and the new owner praises it everytime I meet him.

Good luck
JOHAN
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia