THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
338-06AI questions
 Login/Join
 
One of Us
posted
I used to post here a bunch on the old forums. I still lurk from time to time. I just received a Kiff reamer and a Hart 1/10 barrel. I am looking for some good loads shooting 225-250s. The rifle will be a blue printed 700 mostly for east coast stuff. I will be using Norma/Weatherby brass. Will the 1/10 handle a 300 grain Woodliegh?
 
Posts: 416 | Registered: 21 December 2005Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Give H4350 & RL19 a try under your 225-250gr bullets. I would think a 1/10 would handle the 275-300gr bullets fine.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
posted Hide Post
Blue--I would start wuht IMR 4350, that is what I've used in my 338/06 and with the 250's and 275's.

I've never shot the 300's in my 338/06 but in my 340 they shoot very well.

I'd give them a go and see what happens.

The Speer 275 is a very accurate slug for me as well.

Good luck

Mark D
 
Posts: 1089 | Location: Bozeman, Mt | Registered: 05 August 2005Reply With Quote
One of Us
posted Hide Post
I have a killer 280AI. I keep leaning towards the big slugs for some reason. Do not really need the extra smack. I have not had any luck using Reloader stuff other then 10X. I was looking at H4350 and maybe H414. I have some 4350 RL 19 and 22 so I will give it a go there. Thanks a bunch Merry Christmas. I am sure I will have another question or two. I think this is going to be a fun project.
 
Posts: 416 | Registered: 21 December 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia