THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Feeding issue Mauser
 Login/Join
 
One of Us
Picture of PSmith
posted
All:

Okay, I have an FN Mauser which was built by the W. Brenneke company, chambered in 9.3x64 Brenneke.

I have shot probably 50 rounds through it in the last month, both TSX and Barnes solids, without a problem.

All of a sudden yesterday, I started having feeding problems. Almost always with the second round (magazine holds three). The cartridge would jam against the front of the third round. Once the claw extractor failed to engage the rim on the first round.

So I was thinking the 'usual suspect' is a weak follower spring, so I ordered one from Brownell's.

Thoughts and advice appreciated, thanks.


Paul Smith
SCI Life Member
NRA Life Member
DSC Member
Life Member of the "I Can't Wait to Get Back to Africa" Club
DRSS
I had the privilege to fire E. Hemingway's WR .577NE, E. Keith's WR .470NE, & F. Jamieson's WJJ .500 Jeffery
I strongly recommend avoidance of "The Zambezi Safari & Travel Co., Ltd." and "Pisces Sportfishing-Cabo San Lucas"

"A failed policy of national defense is its own punishment" Otto von Bismarck
 
Posts: 2545 | Location: The 'Ham | Registered: 25 May 2007Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Check make sure the follower is not hanging up/
If you have had it out, you may have put the spring or follower in backwards or it is not centered in the box.
DAve
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia