Savage WSM Extraction problem?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/611101935

15 September 2006, 00:57

Maxx

Savage WSM Extraction problem?

I need help,

I have a new out of the box 7mm WSM SAvage 16fcsak- it will not extract the case, as I pull back on the bolt, the shell "falls" out, and the case just sites there,

is this a common problem?

How can I solve this?

thanks

15 September 2006, 01:16

ELKMAN2

My 223 did the same thing, I called Savage and they sent a new extractor, it works most of the time now but not 100%

16 September 2006, 00:11

Reloader

quote:
How can I solve this?

That's real easy you see, just take it down to the local gun shop and trade it on a Model 700 or a Model 70 and problem solved

Just couldn't resist.

Call Savage, they'll help you out. You can go to www.savagearms.com and get their contact info.

Have a Good One

Reloader

16 September 2006, 01:36

cjp45

I'm having the same problem with my 325 WSM that I built from a pre accu trigger action. I found that if I pull the bolt back slowly the spent case won't eject but if I do it fast it pops them out most of the time. I never have a problem with loaded rounds ejecting.

NRA LIFE MEMBER
SA Stainless Savages,Swift Premier Scopes and SSS Triggers.

16 September 2006, 02:27

cjp45

Maxx,
I was just on another forum and they said it might be a problem with the extracter. They said to have your serial # ready and call Savage to see about a new extracter. They should send you one free of charge. The other forum is SavageShooters.net

NRA LIFE MEMBER
SA Stainless Savages,Swift Premier Scopes and SSS Triggers.

16 September 2006, 09:30

Maxx

quote:
Originally posted by cjp45:
Maxx,
I was just on another forum and they said it might be a problem with the extracter. They said to have your serial # ready and call Savage to see about a new extracter. They should send you one free of charge. The other forum is SavageShooters.net

thanks guys, this is exactly what I did today. The service rep was most helpfull, and I have a new extractor on the way,

to be continued,,