THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Any experience with PMC cartridges?

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: Any experience with PMC cartridges?
 Login/Join
 
one of us
Picture of Gonzo FreakPower
posted
I've had decent accuracy with it in the WinMag and the 06. I've also used the brass for reloading the WinMag and so far it's keeping up just fine with the Wincheter brass. No hunting with it, but that's got nothing to do with PMC, you'll have to see what they're using to cap off whatever flavor ammo you have.

I recommend that you at least give it a try. The stuff is cheap so what's to lose?
 
Posts: 557 | Location: Various... | Registered: 29 December 2002Reply With Quote
one of us
Picture of Heritage Arms
posted Hide Post
When looking at ammo lines for the store I shot a bit of PMC in 7x57mm. In the 140 the ammunition shot well. The 175 was a differnt store it was loaded to the nuts! It shot very well just shrieked out of the barrel of my 7. I shot their gold lable stuff in the .375 and results were ok, not great though. I would like to look into the line further, just the gold line is a tough sell loaded with x bullets

Aleko
 
Posts: 1573 | Location: USA, most of the time  | Registered: 11 March 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Any experience with PMC cartridges?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia