THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
tikka 308 loads
 Login/Join
 
One of Us
posted
I am looking to load either 150gr or 165gr TSX's. Any suggestions.

Perry
 
Posts: 2249 | Location: South Texas | Registered: 01 November 2005Reply With Quote
one of us
posted Hide Post
Sure..
First.. what are you going to use it for?
If deer and medium game then a 150 gr TSX is plenty.
If your looking to hunt a broader spectrum of game up to Elk then the 165 TSX will be a little better.
I think you'll be pleased no matter which you decide tho.
 
Posts: 434 | Location: Wetcoast | Registered: 31 October 2004Reply With Quote
One of Us
posted Hide Post
Strictly deer so leaning towards 150gr loads. I was thinking Varget or 4064???

Perry
 
Posts: 2249 | Location: South Texas | Registered: 01 November 2005Reply With Quote
one of us
posted Hide Post
what ever bullet you shoot. i like varget, 4064. or RL-15. i shoot RL-15 so far it has been the most accurate
 
Posts: 1137 | Location: SouthCarolina | Registered: 07 July 2004Reply With Quote
one of us
posted Hide Post
Yep Varget is prolly the best to start with.
Win ball 748 or 760 are also pretty good.
Sounds like the 150 gr. will be ideal then.
Any decent bbl in 308 winny should deliver very fine accuracy.
You should have quite a shooter there when it all comes together.
Best of luck Perry.
 
Posts: 434 | Location: Wetcoast | Registered: 31 October 2004Reply With Quote
One of Us
posted Hide Post
I've been building loads for my Savage and Tikka and both show excellent accuracy with

IMR 4895 and IMR 4064 . I'm not using the Varget yet as the other two are right where I want them .

42 - 45 grains comes to mind but You need to check a manual to confirm that as I don't have them listed in

this computer . Only in the one between my ears and it's not as reliable as it once was !!!. Eeker
 
Posts: 4485 | Location: Planet Earth | Registered: 17 October 2008Reply With Quote
One of Us
posted Hide Post
Thanks guys for all the input.

Perry
 
Posts: 2249 | Location: South Texas | Registered: 01 November 2005Reply With Quote
one of us
posted Hide Post
No problem..enjoy.
 
Posts: 434 | Location: Wetcoast | Registered: 31 October 2004Reply With Quote
One of Us
Picture of Cliff Lyle
posted Hide Post
Barnes #4 manual shows with a 150 gr TSX that H4895 is the most accurate load tested and the max load has good velocity at 2,854 fps while giving a load density of 99%.

starting load of 42.5 gr yields 2,701 fps.
max load of 45.0 yields 2,854 fps.
 
Posts: 2155 | Location: Oklahoma | Registered: 03 October 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia