THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
33 bulletts
 Login/Join
 
one of us
posted
Guys and gals, I have shot up the last of my Hornaday 33 winchester jacketed bullets,,do any of you know of another company offering jacketed flat pointed .338 that can be used in the 33 winchester..

Or maybe its just time to have it rebarreled to 38-56, and use the .375 flat points


Stay Alert,Stay Alive
Niet geschoten is altijd mis

Hate of America is the defeat position of failed individuals and the failing state
 
Posts: 1529 | Location: Tidewater,Virginia | Registered: 12 August 2002Reply With Quote
one of us
posted Hide Post
Could you grind off the meplate on something like the Speer or Winchester 200 grain bullet for the .338 Win? Alternatively, could the Nosler 180 Ballistic Tip be used safely like the Hornady Leverevolution?

Just a couple of suggestions.

I'd hate to see radical surgery performed on a good old .33 Winchester!
 
Posts: 13262 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
posted Hide Post
There are the obvious sources. Huntington's and Western Scrounger will have them if anyone does. You can put a search on Ebay so you will be notified if any odd lots come up for auction.

Less obviously, you can check the swaging board here to see if anyone is swaging .338 RN and would be willing to do a batch for you. You could also call the Corbins and see if they have sold .338 swaging dies to any of their commercial customers.

Me, I'd go to cast bullets. The .33 WCF is a natural cast bullet cartridge.


It is a good citizen's duty to love the country and hate the gubmint.
 
Posts: 1570 | Location: Base of the Blue Ridge | Registered: 04 November 2002Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Hawk makes them; http://www.hawkbullets.com/Pricelist.htm
Woodleigh makes a protected point you might be able to use.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
Picture of packrattusnongratus
posted Hide Post
Beartooth Bullets makes a cast flatpoint at 235 gr. I am shooting a 240 gr cast flatpoint. It should hit hard but haven't killed any game with it yet. Check with Mt Baldy in Cody WY for the 240 gr. You could probably get close to the 200 gr in a cast bullet if you wish. Cast or jacketed - either way good luck. What rifle are you using it in? Mine is an early smokeless powder frame gun. An 86 made in 1906 I believe. Later Packy
 
Posts: 2140 | Registered: 28 May 2002Reply With Quote
one of us
posted Hide Post
Pack The one I use is a solid frame 86 shotgun butt 24" bbl and full mag tube, it appears to have been made toward the end of the model,


Stay Alert,Stay Alive
Niet geschoten is altijd mis

Hate of America is the defeat position of failed individuals and the failing state
 
Posts: 1529 | Location: Tidewater,Virginia | Registered: 12 August 2002Reply With Quote
one of us
posted Hide Post
I would load the 215 Partition backwards.


Join the NRA
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
one of us
Picture of fredj338
posted Hide Post
quote:
Originally posted by Savage99:
I would load the 215 Partition backwards.

EekerYour kidding right?Confused


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
posted Hide Post
That would be a neat trick considering Nosler don't make a 215!

There's a box of flatpoint speer 200 grainers on ebay right now.
 
Posts: 293 | Registered: 13 February 2004Reply With Quote
one of us
posted Hide Post
Sorry for the typo. Nosler makes a 210 gr

338 Cal. 210 Gr. Partition

Yes, load it backwards. I have done it with many bullets.


Join the NRA
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia