THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
.338-06 OAL
 Login/Join
 
One of Us
Picture of Aaron Little
posted
Can anyone with factory .338-06 loads provide the Overall Length measurements? What about your reloads?

I know most info states 3.370”.


http://www.facebook.com/profil...p?id=100001646464847

A.M. Little Bespoke Gunmakers LLC
682-554-0044
Michael08TDK@yahoo.com
 
Posts: 1026 | Location: Mineola, TX | Registered: 15 October 2010Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Weatherby factory 338-06 210 Nos Part. Measured 1/2 dozen

3.254 to 3.258


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10162 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
My reloads with 200 grain Accubonds are 3.375


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10162 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
They are as long as your throat and magazine will allow. Since there is no SAAMI spec on them, then it is whatever you want it to be and have worked up loads for. That is what a wildcat means.
Just because Weatherby made it doesn't make it totally legitimate. Still more custom ones out there than factory.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by dpcd:
They are as long as your throat and magazine will allow. Since there is no SAAMI spec on them, then it is whatever you want it to be and have worked up loads for. That is what a wildcat means.
Just because Weatherby made it doesn't make it totally legitimate. Still more custom ones out there than factory.


I could be wrong, but I am under the impression that A-Square pushed it through SAAMI several years ago. I recall Weatherby making up some factory rifles.

Even if it is a SAAMI’d round, everything you still basically applies.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3296 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
one of us
Picture of z1r
posted Hide Post
quote:
Originally posted by ColoradoMatt:
quote:
Originally posted by dpcd:
They are as long as your throat and magazine will allow. Since there is no SAAMI spec on them, then it is whatever you want it to be and have worked up loads for. That is what a wildcat means.
Just because Weatherby made it doesn't make it totally legitimate. Still more custom ones out there than factory.


I could be wrong, but I am under the impression that A-Square pushed it through SAAMI several years ago. I recall Weatherby making up some factory rifles.


You are right, SAAMI standardized the .338-06 some years back as the .338-06 A-Square. They aren't providing specs for it on their site now but the AOL is listed as 3.370"..

My Weatherby ammo measures about the same as Mike's.




Aut vincere aut mori
 
Posts: 4865 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
one of us
posted Hide Post
My 1996 A-Square manual shows 3.340" as max OAL. AmmoGuide shows 3.440" which I think must be a typo.


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
One of Us
Picture of bluefish
posted Hide Post
I can't imagine a 250 grain bullet in .338 is any longer than a 220 grain bullet in .308 so wouldn't the COAL be roughly the same?
 
Posts: 5232 | Location: The way life should be | Registered: 24 May 2012Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia