The Accurate Reloading Forums
I found my 300 H&H donor...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/4931097651

05 June 2011, 00:27
Idaho Sharpshooter
I found my 300 H&H donor...
A friend had a Voere Titan II in 300 WM with DST's for sale the last several gun shows here. I was curious, but I want the original 300 Magnum.

I remove the clip this morning, and Sha-Zayummmm!!! The little sticker on the side says "300 WM, 300 Wby, 375 H&H, 6.5x68S, 8x68S."

Run to the table at the end, the man has some factory 200gr ammunition. Magazine takes three! and feeds.

It came home with me, and all's it needs is a new barrel.

Woo-Hoo!

It is a very good day...

Rich
05 June 2011, 00:40
Biebs
Rich, if you have any questions about the Voere, call Phil at KDF. He handled the Mausers, Voeres, and Kleinguenters back in their day.
05 June 2011, 01:20
grizz007
Rich, post a pic....would like to see what the rifle looks like.
05 June 2011, 02:20
Idaho Sharpshooter
thank YOU Biebs! I will get a picture out in a day or two.

Rich
05 June 2011, 21:44
Biebs
In a month or so, Mike at Bijou Creek Customs will have finished up my 300 H&H on a Mauser action with a Luxus stock blank. It'll give you something to motivate you!!!!
06 June 2011, 15:43
Nakihunter
If it is one of the Titans from the 1980s or 90s, the action is silken smooth for an all steel system. I almost bought a 308 a few years ago but it was just a bit heavy for my liking in the bush. That had a single set trigger which was perfect. Good luck on your project Rich and I look forward to some photos of the rifle.


"When the wind stops....start rowing. When the wind starts, get the sail up quick."