THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: CZ550 scope ring height
 Login/Join
 
one of us
posted
I think the problem with lower rings on the CZ will be bolt clearance.
Mike
 
Posts: 49 | Location: Texas | Registered: 07 April 2002Reply With Quote
one of us
Picture of BlackHawk1
posted Hide Post
Cowboy,



I'm in the same boat as Buttstock. Are your 30mm Warne's medium height? Do you have any bolt clearance problems? I mounted my 1" Leupold Vari-Xll 3x9 on my 6.5x55 FS using CZ rings and I have to lift my head to get the correct sight picture. I wish to lower the scope a bit.
 
Posts: 707 | Location: Nebraska | Registered: 23 December 2001Reply With Quote
one of us
Picture of cowboy77845
posted Hide Post
Blackhawk1,
I have a 56 objective on my scope so I had to get the high rings. If you call Warne, they will tell you what height to get. Bolt clearance is no problem on any of my CZ's. I have regular CZ rings on my 550 Varmint with a Leupold 3x9 Vari X ll. Just checked, there is plenty of clearance between bolt and scope. If I had it lower the flip up cap over the obj might not fit. I also have a leather cheek piece on the butstock of one rifle to raise my face. That seems to work fine. In fact, I have cheek pieces on three
so as to position my eye exactly for shots. Beartooth makes a neoprene one that you can build up to fit.
 
Posts: 376 | Location: College Station, Tx | Registered: 11 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia