THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Best factory 30-06 rounds?
 Login/Join
 
One of Us
posted
I have no tools or knowledge to reload, so I'm sticking to factory loads at the moment. If money was no issue, what is the very best factory round available in 30-06, soft point, any weight from 150 to 200 grains? It could be American or foreign. By Best that I mean consistent performance and accuracy, and good brass that will eject reliably every time. Thank you
 
Posts: 88 | Registered: 12 March 2006Reply With Quote
one of us
posted Hide Post
Targets, deer, elk, Africa?
 
Posts: 1416 | Location: Texas | Registered: 02 May 2003Reply With Quote
One of Us
posted Hide Post
No Africa. Dear and hog mostly. Thank you
 
Posts: 88 | Registered: 12 March 2006Reply With Quote
One of Us
posted Hide Post
Federal Blue Box soft points have always been accurate for me no matter the caliber.
 
Posts: 2276 | Location: West Texas | Registered: 07 December 2011Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
JG Raiders suggestion is good and I agree. I've also found the Winchester Silver box ammo very reliable and accurate as well, If you want an upgrade in ammo Winchester Supreme (black box) is great stuff.
You need to figure out what weight bullet and brand of ammo your rifle really likes. Any weight 150, 165, 180 will work fine for what you are hunting just find something accurate in your rifle.
 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
one of us
Picture of Pa.Frank
posted Hide Post
Agree with Snellstrom.

I like Winchester branded ammo as well, but most U.S. manufactured ammo is far better than it was 40 or so years ago. And most offer loadings with premium bullets, if that's your thing.

You need to do some experimenting and determine what brand/load your rifle prefers, and as Snellstrom said, anything in the 150-180 grain range should work for your intended purpose.


NRA Benefactor.

Life is tough... It's even tougher when you're stupid... John Wayne
 
Posts: 1984 | Location: The Three Lower Counties (Delaware USA) | Registered: 13 September 2001Reply With Quote
One of Us
posted Hide Post
I'd go with Barnes Vor-tx or Remington with A-frames.
 
Posts: 504 | Location: California | Registered: 04 February 2013Reply With Quote
One of Us
posted Hide Post
If your rifle shoots the Barnes TTSX bullet well I have found the Barnes Vortex ammo to be very accurate and consistent. The thing to remember is that monometal bullets act like heavier class bullets. If you like 180 grain cup and core rounds then use the 165 grain Barnes. Your rifle will either love them or hate them....won't take long to find out.
 
Posts: 264 | Registered: 20 July 2011Reply With Quote
One of Us
posted Hide Post
In the 30,06
For versatility i like 165 grain bullets. I would start with Any quality load. Hornady is good for me !
...tj3006
 
Posts: 605 | Location: OR | Registered: 28 March 2012Reply With Quote
One of Us
posted Hide Post
I have found the Norma USA ammo to be consistent, reliable and very accurate from box-to-box with both their Oryx and Kalahari bullets.


"Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars."
 
Posts: 410 | Location: Maryland | Registered: 12 August 2004Reply With Quote
one of us
posted Hide Post
For deer and hogs I'd use 180 grain Rem Corelocts.
 
Posts: 3174 | Location: Warren, PA | Registered: 08 August 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Dthfrmbv:
I have found the Norma USA ammo to be consistent, reliable and very accurate from box-to-box with both their Oryx and Kalahari bullets.


Ditto - though I've only used Oryx and Alaska.
If all else fails, the Norma Oryx has been my fallback ammo for a good time now.

For best brass - use Lapua.
For deer and hog the Mega oughta do the job plenty well - for bigger, go Naturalis.

- Lars/Finland


A.k.a. Bwana One-Shot
 
Posts: 556 | Location: Finland | Registered: 07 August 2007Reply With Quote
One of Us
posted Hide Post
Adrian, expense doesn't always increase accuracy, it all depends on the harmonics of your individual barrel. Oftentimes a simple inexpensive load like the Remington Core-Lokt will shoot better than a premium brand in your rifle. Try as many typed of factory ammunition as you can, and one will shoot as well as a good handload.
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
one of us
posted Hide Post
Biebs nails it.
 
Posts: 3174 | Location: Warren, PA | Registered: 08 August 2002Reply With Quote
one of us
posted Hide Post
For deer and hogs, whatever shoots best in your rifle will work. When I bought my last 30-06 I sighted in with Winchester inexpensive silver box 150 grain rounds. They proved so accurate, I just have not looked farther. They killed my 200# hog just as dead as if it had been premium.

I usually start with the two mentioned by JGRaider and Snellstrom. If Federal and Winchester don't work, I assume I have another problem.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
quote:
Adrian, expense doesn't always increase accuracy, it all depends on the harmonics of your individual barrel. Oftentimes a simple inexpensive load like the Remington Core-Lokt will shoot better than a premium brand in your rifle. try as many typed of factory ammunition as you can, and one will shoot as well as a good handload.



Yup. My M70 30 06 liked Federal 180 TSX, then Rem Core_lokt, then Rem with the Swift A-Frame. All good enough for hunting, but the Federal performed the best. I've yet to hand load for it because I have a bunch of the factory.
 
Posts: 7828 | Registered: 31 January 2005Reply With Quote
One of Us
Picture of tomahawker
posted Hide Post
Remington accu-tips through a rem. 700. Very noticeable difference from the regular cor-loks.
 
Posts: 3633 | Registered: 27 November 2014Reply With Quote
One of Us
posted Hide Post
quote:
Remington accu-tips through a rem. 700. Very noticeable difference from the regular cor-lok

Maybe, maybe not....depends on what the gun likes. Hey, welcome to AR, Tomahawker!
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
posted Hide Post
I have had good luck with Federal 180 loaded with Nosler partitions. Not sure if they still load them.
 
Posts: 1301 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
Picture of Austin Hunter
posted Hide Post
Hornady factory ammo; SSTs for deer


"Evil is powerless if the good are unafraid" -- Ronald Reagan

"Ignorance of The People gives strength to totalitarians."

Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness.
 
Posts: 3083 | Location: Austin, Texas | Registered: 05 April 2006Reply With Quote
one of us
posted Hide Post
I suspect ANY Factory loaded 150 gr. ammo will suit your purpose just fine..Deer and pigs don't require the super bullets, in fact, the softer cup and core bullets work perhaps a bit better IMO.

I have used more WW power points than any other bullet, but the Rem Corelokt has always served me as well. I have used both bullets on deer and elk and probably Antelope, and no regrets.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of tc98
posted Hide Post
Remington CoreLokt, or Hornady SST would both work well. Most rifle's will shoot them reasonably well.
 
Posts: 250 | Location: Alabama | Registered: 07 December 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia