THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    RUGER #1 35 WHELEN 1/16 TWIST QUESTION

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
RUGER #1 35 WHELEN 1/16 TWIST QUESTION
 Login/Join
 
One of Us
posted
Might jump on one of these. I really like the Whelen. My current Whelen is an AI bolt gun that I went 1/14 twist on.

The Ruger #1 comes 1/16. Anyone see any issues with me shooting the 225gr Accubond? 225gr TSX? 225gr GameKing??

How about the 200gr Hornady FlexTip??

Thanks for the help on this one.
 
Posts: 969 | Registered: 13 October 2009Reply With Quote
One of Us
Picture of Dave Bush
posted Hide Post
I don't think you will have any problem will bullets up to 250 grains. However, the twist is too slow to shoot bullets heavier than that. My Remington Classic shot the 225s and 250s great, especially the 250 Speer which is a real killer.


Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).
 
Posts: 3728 | Location: Midwest | Registered: 26 November 2006Reply With Quote
One of Us
posted Hide Post
Dave,

Which Speer? I bought a few hundred rounds of the no longer made (brain fart, not remembering the name..). I guess they are now replaced by the Speer Grand Slams.

My 35 Whelen AI likes them.

I mostly will be shooting 200 and 225gr with the Ruger #1 (if I pull that plug).
 
Posts: 969 | Registered: 13 October 2009Reply With Quote
One of Us
posted Hide Post
I had one of their stainless models. It shot 225 gamekings the best, then 225 tsx. Accuracy fell off after 2500fps with anything I ran through it.
 
Posts: 1115 | Location: oregon | Registered: 20 February 2009Reply With Quote
One of Us
posted Hide Post
My 35 Whelen #1 Stainless (factory) has a 1:12 twist.
Wish it was a 1:16 which is better for cast bullets which is all I shoot out of it..





 
Posts: 592 | Registered: 28 February 2005Reply With Quote
one of us
Picture of Jerry Eden
posted Hide Post
The Speer you might be thinking of is the "Hot Core". Excellent bullet on elk. My Whelen is 1/12 not by my design, but by the barrelers. However, several of my shooting buddies have 1/16's and they shoot 250's great. Personally, I like the 225 Ballistic tip, now Accubond, smokes elk also. As to heavier bullets, if you need more than a 250 grain, anything, use a Magnum, as I do.

Jerry


NRA Benefactor Life Member
 
Posts: 1297 | Location: Chandler arizona | Registered: 29 August 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    RUGER #1 35 WHELEN 1/16 TWIST QUESTION

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia