THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
8X68S
 Login/Join
 
one of us
posted
Has anyone on this forum had any experience with the 8X68S round? I was talking with a chap in Spain and he was very high on this round. He says it shoots really flat and penetrates well.
 
Posts: 890 | Registered: 27 February 2003Reply With Quote
one of us
posted Hide Post
first of all, Hawkeye, congratulations for your hunt in Spain.

the 8x68S is a fantastic cartridge. It shoots a .323" bullet at high speed.

among the us cartridges it is almost identical to the 8mm remington Magnum. not being the latter an extremely popular or well knowned cartridge, I would compare it, both trajectory and energy wise, to the more common 300 weatherby magnum.

regards,

montero
 
Posts: 875 | Location: Madrid-Spain | Registered: 03 July 2000Reply With Quote
one of us
posted Hide Post
Gentlemen,

I've seen the 8x68s used by numerous German and Austrian hunters in Namibia, and it is incredibly effective on all manner of plains game. I'm sure it could work on bigger creatures too, but I haven't seen that, so I don't feel qualified to comment.

I think with the RWS H-Mantle or Nosler Partition, etc..it is an incredible round.
 
Posts: 643 | Location: DeRidder, Louisiana USA | Registered: 12 August 2001Reply With Quote
one of us
posted Hide Post
Snowman who also posts on here was hunting with his this year, I believe. I'm still putting mine together. The 8X68S is in line ballistically with the 8mm Rem Mag, USING FACTORY AMMO. If you handload, the 8 Rem Mag is a whole step ahead. It's a good cartridge though, certainly better ballistically then the 30-06, about close to the 300 H&H, I guess. FWIW - Dan
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
one of us
posted Hide Post
You may want to try Hodgdon's Retumbo in the 8x68S....I've been working with it all year in an 8mm Rem Mag and it groups well (also produces outstanding velocity out of 26" barrel). To date, my best shooting load has been 87.5 grains of Retumbo behind a 220 grain Sierra GameKing (vel = ~3,020 fps)

Lee Martin
www.singleactions.com
 
Posts: 380 | Location: Arlington, VA | Registered: 24 December 2002Reply With Quote
one of us
posted Hide Post
dan belisle,

if you handload, then the 8 Rem Mag is a whole step ahead of the 8x68.

even if you handload, the 300 H&H is a whole step behind.

giving credit were it is worth. [Wink]

regards,

montero
 
Posts: 875 | Location: Madrid-Spain | Registered: 03 July 2000Reply With Quote
one of us
posted Hide Post
The 8x68 is closer to the 338 in effectiveness than it is to a 300 mag in my opinion. If you want to handload 200 gr bullets IMR 4831 ,RL 19 and RL22 are all very good. I would suggest Retumbo would be too slow in a 8x68. The 8mm Rem mag with handloads will best the 8x68 by about 100 fps with any bullets weight.The beltless case also feeds like a dream. Say Dan When will you be shooting your 8x68??
 
Posts: 2447 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
one of us
posted Hide Post
Hey Snowman, how you doing? Work has kept me a little busy lately, but I'm back now, so I hope to get a little more work done. With any luck, I'll have it all ready to go by Christmas. Maybe I'll wrap it and give it to myself, I can finally get EXACTLY what I wanted (joke). Yeah, another month should do it. How's your hunting season been so far? - Dan
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
one of us
posted Hide Post
My biggest complaint I have with my 8x68 is the brass. If you get it from RWS it is fantastic quality but man you have to pay. The stuff from old western scrounger works ok but does not have much of a life, and I am not one to try to get the max out of a case. I took mine to S Africa and left it laying on the ground with shoulder splits after 2 loadings. It looks like an 06 on steroids and feeds really smooth through my 98 action. Not many of your friends have one and it is fun explaining to them what it is!
shayne
 
Posts: 127 | Location: yuma, AZ | Registered: 22 August 2002Reply With Quote
<Safarischorsch>
posted
quote:
Originally posted by shayneC:
My biggest complaint I have with my 8x68 is the brass. If you get it from RWS it is fantastic quality but man you have to pay. The stuff from old western scrounger works ok but does not have much of a life, and I am not one to try to get the max out of a case. I took mine to S Africa and left it laying on the ground with shoulder splits after 2 loadings. It looks like an 06 on steroids and feeds really smooth through my 98 action. Not many of your friends have one and it is fun explaining to them what it is!
shayne

RWS 8x68S brass is one of the most stabil brass that money can buy, of course it is a little bit expensive...but it works for many loads...
For your cheap stuff:Try a little bit case lube in the neck! You will see even with "hot" loads at least 10 reloads should be possible! 8x68S brasses are extreme thick so do not forget trimming the brass from time to time... For all 8x68S Users: 76,4 grain R 905 196gr Brenneke TIG OAL: 87mm, Primer RWS 5333 or CCI LRM. A good load for boar or red deer...

[ 11-11-2003, 23:44: Message edited by: Safarischorsch ]
 
Reply With Quote
one of us
Picture of Fritz Kraut
posted Hide Post
quote:
Originally posted by Safarischorsch:
For all 8x68S Users: 76,4 grain R 905 196gr Brenneke TIG OAL: 87mm, Primer RWS 5333 or CCI LRM. A good load for boar or red deer...[/QB]

The only thing I don�t like with this cartridge is the AOL: 87 mm - and a standard M/98 magasine is 84,5mm. You have to lengthen the mag.

The 8x64 Mazon is thus a nice idea.

Fritz
 
Posts: 846 | Location: Sweden | Registered: 19 April 2001Reply With Quote
<Safarischorsch>
posted
quote:
Originally posted by Fritz Kraut:
quote:
Originally posted by Safarischorsch:
For all 8x68S Users: 76,4 grain R 905 196gr Brenneke TIG OAL: 87mm, Primer RWS 5333 or CCI LRM. A good load for boar or red deer...

The only thing I don�t like with this cartridge is the AOL: 87 mm - and a standard M/98 magasine is 84,5mm. You have to lengthen the mag.

The 8x64 Mazon is thus a nice idea.

Fritz[/QB]

hello fritz!
of course you must lengthen the magazine but that is not really a big problem i think.
 
Reply With Quote
one of us
Picture of Fritz Kraut
posted Hide Post
quote:
Originally posted by Safarischorsch:
hello fritz!
of course you must lengthen the magazine but that is not really a big problem i think.

How much must you lengthen it? Other suggestions?

Fritz
 
Posts: 846 | Location: Sweden | Registered: 19 April 2001Reply With Quote
<JOHAN>
posted
Fritz kraut

A Brno zg-47 will handle it well, it has a couple of millimeters more lenght than the standard mausers, at least mine has [Big Grin]

There is also a fantastic 8,5X64 wildcat made on the 9,3X64 Brenneke case [Smile] [Razz] [Eek!] [Big Grin]

/ JOHAN
 
Reply With Quote
new member
posted Hide Post
Will the Remington 700Bdl handle the 8 x 68???
Or does it only fit in the Magnum version?
/Twinn
 
Posts: 18 | Location: Sweden | Registered: 09 May 2003Reply With Quote
one of us
posted Hide Post
The Remington 700 only comes in two lengths, short and long. An 8 X 68S can be fitted to a long Remington action. - Dan
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
one of us
posted Hide Post
/
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
one of us
Picture of wildcat junkie
posted Hide Post
quote:
Originally posted by dan belisle:
The Remington 700 only comes in two lengths, short and long. An 8 X 68S can be fitted to a long Remington action. - Dan

Correction:

The Remington 700 comes in two lengths TOO SHORT, and TOO LONG! [Big Grin] [Big Grin] [Big Grin]
 
Posts: 2440 | Location: Northern New York, WAY NORTH | Registered: 04 March 2001Reply With Quote
new member
posted Hide Post
I was considering the 8x68 also as an elk cartridge for these big beefy coastal Rooseveldt elk,a couple others I had in mind were the 8x338 and the old 323 Hollis , but I can't find any info or gunsmiths who chamber the Hollis or any specs. Any of you people had any experiance with the 8x338 or information on the Hollis?
 
Posts: 7 | Location: Oregon | Registered: 24 November 2003Reply With Quote
One of Us
Picture of ACRecurve
posted Hide Post
Frank,

Can't answer your question---just wanted to say welcome aboard!

Good Hunting,
 
Posts: 6711 | Location: Oklahoma, USA | Registered: 14 March 2001Reply With Quote
one of us
posted Hide Post
I believe that the 8mm-338 and the Hollis were known as the PMM, or "Poor Man's Magnum. About identical ballistics to the 8 X 68S. - Dan
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia