THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    adjusting iron sights for 100yd offhand shooting

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
adjusting iron sights for 100yd offhand shooting
 Login/Join
 
one of us
posted
Here are some interesting pictures of point of impact at 50yds and 100yds standing and off the bench.The first target shows two windage sight adjustments at 100yds from the bench.The sights are moved from the right to the left and end up shooting a little lower in the process.The second target shows that despite the adjustments, point of impact is almost identicle at 50yds(four shots verticle).The third target shows a large group,slightly to the left of the bullseye, shot at 100yds offhand,using the bottom, 100yd off the bench setting, shown above.This goes to prove that when a rifle is adjusted to shoot bullseye at 100yds from the standing offhand position it will shoot dead center at 50 and 25 yds. [URL= ]100yds off the bench[/URL] [URL= ]50yds off the bench-ignore the shot above and the two on each side[/URL] [URL= ]100yds offhand,windy conditions[/URL]
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    adjusting iron sights for 100yd offhand shooting

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia