THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Accurate 2700 in 300 Savage?
 Login/Join
 
One of Us
posted
Accurate shows some 300 Savage loads using 2700. 2700 appears to be in the 414/760 burn rate. Any of you tried loading 300 Savage with powders this slow?
 
Posts: 65 | Location: Georgia | Registered: 02 October 2006Reply With Quote
one of us
posted Hide Post
you can do that in a bolt gun such as a Rem 722, but with a 99 savage I figure on 2600 FPS, and that's plenty for deer any day...As a rule I cut back two grs. on any book load for a Savage 99, in any caliber...but a 99 will clue you when you have gone a tad too far, you will feel the lever drop just a hair in most guns, then its time to cut back a grain.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Tried 2700 accurate with 165 gr bullets in my 300 savage built on a M36 Mexican action. Accuracy was nothing to brag about using several different loads of the powder.....1 1/2 - 2" 100 yd groups being about norm for me with it.
 
Posts: 194 | Location: Huffman, Tx | Registered: 30 November 2008Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by huffmanite:
Tried 2700 accurate with 165 gr bullets in my 300 savage built on a M36 Mexican action. Accuracy was nothing to brag about using several different loads of the powder.....1 1/2 - 2" 100 yd groups being about norm for me with it.


Is it the powder or the gun?
 
Posts: 19740 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
quote:
but with a 99 savage I figure on 2600 FPS, and that's plenty for deer any day...As a rule I cut back two grs. on any book load for a Savage 99, in any caliber..


Ray has good advice I load Bal.C2 for 2450fps in my 99 300sav with a 165gr corlock and have killed dozens of deer with it.

The 99s are great guns but they are not bolt guns.
 
Posts: 19740 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
I was refering to Accurate 2700 powder. Not trying to get 2700 fps.
huffmanite confirmed my thoughts, probably a little slow burning for the size case. I have BLC2, H4895, 3031, and Accurate2495 will work with them.
 
Posts: 65 | Location: Georgia | Registered: 02 October 2006Reply With Quote
one of us
posted Hide Post
To me IMR 4064 seems to be about the perfect burn rate with a 150 gr bullet in the 99. 42 gr with 150 Hornady Spitzer gives me 2700 fps making that old rifle a dead on hold on deer size game out to 300 yards.

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13091 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
One of Us
posted Hide Post
I use 2700 and 150gr bullets in my 300 savage.
it's quite a sight to see that bullet poking out of the little case.
but it works very well and duplicates the 308.
2700 is at it's best when the case is full and this is one of those places.
it's also very good in the 7.7 jap and 7.65 argie cases.
I'd love to find another 8lb jug of 2700 right now.
 
Posts: 5003 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
One of Us
posted Hide Post
 
Posts: 304 | Location: Minnesota | Registered: 12 February 2007Reply With Quote
One of Us
posted Hide Post
woah thanks TJAY.
I love this powder in my 220 swift and 22-250 too.
I can get 4350 locally [and I have 414 on hand]but 2700 just does what it does so well.
 
Posts: 5003 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
one of us
posted Hide Post
I did miss read your thread and just assumed 2700 FPS, as that is what most 300 Savage shooters seem to try for with 150f gr. bullets and that's stressing the 99 to a point IMO.. sorry about that, but my advise from that point is still a good practice..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Lamar:
I use 2700 and 150gr bullets in my 300 savage.
it's quite a sight to see that bullet poking out of the little case.
but it works very well and duplicates the 308.
2700 is at it's best when the case is full and this is one of those places.
it's also very good in the 7.7 jap and 7.65 argie cases.
I'd love to find another 8lb jug of 2700 right now.


I've no reason to disagree with above. While I tried several different loads of A2700 in my 300 Savage with 165 gr bullets, I basically stay on the low side of recommended powder charges.....so I'm pretty sure I was no where near 100% load density when I tried it.
 
Posts: 194 | Location: Huffman, Tx | Registered: 30 November 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia