THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Tell me about your Dakota 97 rifle

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Tell me about your Dakota 97 rifle
 Login/Join
 
One of Us
posted
I got one of the Dakota synthetic 97's in a trade. I think it's one of the older lightweights in .270, 22" barrel, and it was unfired when I got it.
It seems to like the lighter 130gr bullets (Hornady factory) but only shooting about 1 1/4" - 1 1/2" so far. Close enough for hunting but I would have thought it would do better than that......
Right now it's in for some trigger work and new Talley bases. Hopefully I can get a good handload worked up for it that will come in at about an inch. I could live with that...


Sendero300>>>===TerryP
 
Posts: 489 | Location: Texas, USA | Registered: 25 December 2004Reply With Quote
one of us
posted Hide Post
Mine is a wood stocked 9,3x62. It's a 1/2 to 3/4 MOA (sometimes better) shooter. Just because it only shot factory ammo into 1 1/2 MOA doesn't mean it won't shot 1/2 MOA with good tuned handloads.
If I were you I'd try 61grs of RL-22 under a 130gr TSX .050 off the lands or 60grs of RL-22 behind a 140gr Accubond .005 or so off the lands. My Beretta Mato (a Dakota clone) shoots the Accubond load scary good, and a Sako Finnlite bugholes the 130 TSX load. I'd bet you 97 will shoot very well with loads it likes................DJ


....Remember that this is all supposed to be for fun!..................
 
Posts: 3976 | Location: Oklahoma,USA | Registered: 27 February 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Tell me about your Dakota 97 rifle

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia