THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
7 STW Brass
 Login/Join
 
One of Us
posted
I am looking for some brass. if anyone knows who hs any I would like to buy some
thanks
 
Posts: 1396 | Registered: 24 September 2007Reply With Quote
one of us
Picture of Doc
posted Hide Post
Me too. Good luck. Hot commodity and hard to get and most of those who know where to find it aren't talking.


Ted Kennedy's car has killed more people than my guns
 
Posts: 7906 | Registered: 05 July 2004Reply With Quote
One of Us
posted Hide Post
couldn't you form from 375 H&H brass?


If you think every possible niche has been filled already, thank a wildcatter!
 
Posts: 2287 | Location: CO | Registered: 14 December 2007Reply With Quote
One of Us
Picture of Slider
posted Hide Post
8mm Rem Mag is the parent case?
 
Posts: 2694 | Location: East Wenatchee | Registered: 18 August 2008Reply With Quote
One of Us
posted Hide Post
My rifles have all thrived on .300 H&H that I blueprinted. In fact, they've never seen any factory.


A stranger is a friend we haven't met
 
Posts: 56 | Location: Yellowknife, NWT, Canada | Registered: 31 March 2010Reply With Quote
One of Us
posted Hide Post
Keep posting in the classified section. The only new factory brass you will find is Nosler 8mm Remington and it is scarce as well.
 
Posts: 402 | Location: Colorado Springs, Colorado  | Registered: 15 January 2005Reply With Quote
one of us
posted Hide Post
This appears to be a typical Remington thing!

Launch a cartridge, folks buy in to it run it for a few years then drop it !

They did this with the 7mm STW the 8mm Rem Mag and also the 416 Rem Mag.
Their current RUM's are also going the same way.

It's frustrating and above all it puts me off ever going with anything new they ( Remington) put out there.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
one of us
posted Hide Post
7 STW brass is on seasonal production- in other words when and if they get enough orders they will make the brass.
 
Posts: 869 | Location: N Dakota | Registered: 29 December 2003Reply With Quote
one of us
posted Hide Post
I seems to recall that Nosler had alot of 2nd's leftover. Check out there website un seconds or blemished.
 
Posts: 1935 | Registered: 30 June 2000Reply With Quote
One of Us
Picture of mdvjrp93
posted Hide Post
I think someone saidm on another thread that you can make 7STW from 300 win mag. Find Antelopesniper and IM him he will know if or how it is done.


1 shot 1 thrill
 
Posts: 340 | Location: South Carolina | Registered: 14 December 2010Reply With Quote
Moderator
posted Hide Post
quote:
Originally posted by mdvjrp93:
I think someone saidm on another thread that you can make 7STW from 300 win mag. Find Antelopesniper and IM him he will know if or how it is done.


You've got it wrong.


You can form 7mmSTW from .300H&H, not .300Win.Mag. (which is too short).

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
Picture of mdvjrp93
posted Hide Post
Okay George, That is why I said I think I read it on another post. Thjat is also why I referred him to AS he shoots a STW and is very knowledgeable on reloading. I do appericat you correcting me I don't want to steer anyone wrong. Thanks!


1 shot 1 thrill
 
Posts: 340 | Location: South Carolina | Registered: 14 December 2010Reply With Quote
new member
posted Hide Post
Call RCBS
 
Posts: 18 | Location: northern California  | Registered: 02 February 2012Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia