THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Possible 35 Whelen project?
 Login/Join
 
One of Us
posted
I was at a little Wisconsin shop today, and picked up a well sporterized Remington P17. It was too cheap to not buy at $275. The barrel was shortened to 20 inches, and never crowned. I was thinking of just having it crowned and keeping it as a 30-06, but also am toying with the idea of having the (military) barrel bored out and turning it into a 35 Whelen, simply because I have never owned one.
Any thoughts on a 20 inch Whelen? What twist, 1 in 12 or 1 in 16?
I'm open to any random thoughts. If I decide to re-bore, any suggested shops?
 
Posts: 1981 | Location: South Dakota | Registered: 22 August 2004Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
I wouldn't spend my $$ having a military barrel rebored. You can have a new one for installed for basically the same price. I like the Whelen but I would also like a touch more barrel. If you go with the rebore I would go 12 or at the most 14. To me 16 is too slow.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
I was under the impression that a rebore had to retain the original twist...I could be wrong. In any event, I wouldn't bother with a rebore of an original military barrel especially one that has been chopped to 20 inches. Just buy a new 35 cal barrel and have it installed.

My $.02

Edit: After seeing Paul's reply, I realize my advice is only worth $.01 (if that).


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
One of Us
Picture of Fury01
posted Hide Post
A re-bore cleans out all the rifling so any new twist that the boring machine can do can be done.
Barrel length; your choice I guess, I like them long on the Whelen. You can get a very good fellow to re-bore your barrel at http://www.35caliber.com/ at quite a bit less than a new fitted Barrel. 1 in 14 works well with about every bullet but he can guide you in that too I would think.


"The liberty enjoyed by the people of these states of worshiping Almighty God agreeably to their conscience, is not only among the choicest of their blessings, but also of their rights."
~George Washington - 1789
 
Posts: 2135 | Location: Where God breathes life into the Amber Waves of Grain and owns the cattle on a thousand hills. | Registered: 20 August 2002Reply With Quote
one of us
posted Hide Post
A Whelen needs a 24 inch barrel to perform to its capability IMO..I also prefer the IMP 35 Whelen and the Brown Whelen is the best of all if your so inclined to the trouble of fireforming..

I'd just crown it and shoot 220 gr. bullets if you like the whelen, that's pretty close balistically. Otherwise get new barrel.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42228 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Yup, go with a new barrel at 24" if you go the Whelen route. I'd only rebore if there was an expensive sight set-up I wanted to retain or if the barrel had a full rib or something, otherwise it doesn't seem cost effective. I have the improved version, but if were to build one today I would go with the plain vanilla version. Just not enough to be gained to justify the extra work(fireforming). Solids do look cool in the improved case though...




Sent from my iPhone
 
Posts: 668 | Location: Missouri | Registered: 15 June 2014Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia