THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Kimber Montana Stock
 Login/Join
 
One of Us
posted
I looked at a Kimber Montana yesterday. I liked the rifle but, the stock felt like it was covered in sandpaper-very rough feeling.

Does the stock feel rough on the ones that you own?

I did not look at a second one to see for myself.
 
Posts: 618 | Location: North Louisiana | Registered: 01 February 2011Reply With Quote
one of us
posted Hide Post
Most composite stocks feel like a stump to me, and, like you, my cheek didn't agree with the surface of the Kimber, it does feel like sandpaper, thus my reasoning for the purchase of a blue Kimber 308 with a slim nice wood stock, and even got a big discount because it was wood and blue!! I love my little wooden blue Kimber!!...Im in the minority on this clip I fear!! shocker


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
cj

I have two Kimber Montanas and like the stock on both of them. Never noticed any issue with roughness, of course Ray says I am thick skinned.

Wink


"The rule is perfect: in all matters of opinion our adversaries are insane." Mark Twain
TANSTAAFL

www.savannagems.com A unique way to own a piece of Africa.

DSC Life
NRA Life
 
Posts: 3386 | Location: Central Texas | Registered: 05 September 2013Reply With Quote
One of Us
posted Hide Post
I appreciate a nice piece of wood on a rifle, I just don't want to scar it up while hunting.

I have a couple of HS Precision stocks and like them.

I will look at some more Montana's before I make my decision.
 
Posts: 618 | Location: North Louisiana | Registered: 01 February 2011Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
I can't stand the battleship Gray paint....so I painted my Kimber

Made it even rougher!! I like it that way



________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
Ted,

Nice looking rifle!
 
Posts: 618 | Location: North Louisiana | Registered: 01 February 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by cjfoster:
Ted,

Nice looking rifle!


+1

How did you do that?
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
one of us
posted Hide Post
Sean,
I said thick headed not thick skinned! rotflmo


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
scratching up wood, scratching up a composite, whats the difference, both can be refinished, but I like the scars on my wood stocks, the lack of blue, the memories of great hunts that go with honest wear and tear, its beautiful...


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
quote:
Originally posted by lindy2:
quote:
Originally posted by cjfoster:
Ted,

Nice looking rifle!


+1

How did you do that?


That stock got a workover.

I shortened the grip cap 1/8" and heavily radiused all the sharp corners.

Then I sanded all of the factory paint off down to the gell coat.

Several coats of black Fusion are step #1 in the paint process

Step #2 calls in the texture....Krylon Stone

Over that I lay several coats of sage colored Krylon

Add over the top of that Krylon marbling paint then a coat of matte clear

All of my composites get this treatment


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
This is a 1st Gen Ti for a Remington 700


























A pair of Remington 700 ADL's both in 30-06
One for 150's and the other for 180's

Sage Rem 700 in 30-06

Tan Rem 700 in 30-06


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Atkinson:
Sean,
I said thick headed not thick skinned! rotflmo



tu2 beer


"The rule is perfect: in all matters of opinion our adversaries are insane." Mark Twain
TANSTAAFL

www.savannagems.com A unique way to own a piece of Africa.

DSC Life
NRA Life
 
Posts: 3386 | Location: Central Texas | Registered: 05 September 2013Reply With Quote
One of Us
posted Hide Post
Ted

Really nice stuff!

Those last two photos should answer about ten thousand questions asked every fall as to whether the 30-06 is adequate for elk and plains game.
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
One of Us
Picture of Nakihunter
posted Hide Post
My Kimber Montana stock is plain grey and has the rough finish which gives great grip even when hunting the wet bush here in NZ.

One problem I would like to mention is the front sling swivel. The thread stripped from the aluminium nut moulded into the stock. A friend had the same problem. I just glued it with Epoxy and now it does not move.


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11370 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
One of Us
Picture of waterrat
posted Hide Post
My Kimbers stock feels just fine to me, when it gets gouged up I grab a can of Krylon and carry on.


I tend to use more than enough gun
 
Posts: 1415 | Location: lake iliamna alaska | Registered: 10 February 2005Reply With Quote
One of Us
posted Hide Post
My 270 Montana's stock was smoothed a bit then repainted so is a bit finer in texture than factory though not slippery at all. A chap up in Chico Cal did it for me. I also had him install a slightly thinner, lightweight recoil pad (from Italian made shotguns) that dropped a couple of oz off the azz end. All in with a Leupold 6x in Tally's it goes 1 oz over 6# and handles better than anything I own.



 
Posts: 1577 | Location: Either far north Idaho or Hill Country Texas depending upon the weather | Registered: 26 March 2005Reply With Quote
One of Us
posted Hide Post
Ya'll have some great looking rifles.

I may have to get one of these. Will have to decide on the caliber first.
 
Posts: 618 | Location: North Louisiana | Registered: 01 February 2011Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
I'm always on the lookout for a 7mm WSM Montana

It might just be my next "last" rifle


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Boxhead:
My 270 Montana's stock was smoothed a bit then repainted so is a bit finer in texture than factory though not slippery at all. A chap up in Chico Cal did it for me. I also had him install a slightly thinner, lightweight recoil pad (from Italian made shotguns) that dropped a couple of oz off the azz end. All in with a Leupold 6x in Tally's it goes 1 oz over 6# and handles better than anything I own.





That's one true and unpretentious hunting rifle/scope! It really just doesn't get any better than that.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3296 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
One of Us
Picture of A7Dave
posted Hide Post
I've got one in .300 WM. It is an ugly stock, but very light. If I didn't make my own lightweight .375, I would have bought a .375 Talkeetna, ugly stock and all.


Dave
 
Posts: 927 | Location: AKexpat | Registered: 27 October 2008Reply With Quote
one of us
posted Hide Post
Just out of curiosity what is the process to spider webbing, it seems neigh on impossible to me but some have told me its a piece of cake?? don't see how that could be.. Roll Eyes


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
new member
posted Hide Post
Ray, the can of paint has some type of splatter nozzle on it. Hold the can upright and sweep right to left across the base color. Depending on speed of the sweep, it will be light or heavy. A couple of passes on some cardboard will help you set the pace. If it's too light, you can always do a second pass. Because of the nozzle, it really is that easy
 
Posts: 9 | Location: Beaverton | Registered: 16 February 2005Reply With Quote
one of us
posted Hide Post
Get some spider webs ,spray with paint , while paint is still wet,wrap the stock with it. 2020

Spiders ?you already have those , they live in those butt pads that have a series of holes !! cuckoo LOL
 
Posts: 7636 | Registered: 10 October 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia