THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
200 gr bullets for 30 cal.
 Login/Join
 
one of us
posted
What bullet in 200gr is mostly shot from a 300 Win or Rem RUM or Wby 300 or 30/06.
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
one of us
posted Hide Post
quote:
What bullet in 200gr is mostly shot from a 300 Win or Rem RUM or Wby 300 or 30/06.


Confused on what your asking here. An excellent 200 gr 30 cal bullet is the Nosler partition. In my mind for hunting it holds the title of "THE" 200 gr bullet in 30 cal, the only real competion Nosler has are from Swift and Woodleigh ( excellent bullets both no complaints except cost )

For target use, Sierra makes a 200 matchking, they also make gamekings but these are not in the same class as the bullets above. And finally Speer's who fall in between the premium stuff above and the Sierra's.
 
Posts: 1486 | Location: Idaho | Registered: 28 May 2004Reply With Quote
one of us
posted Hide Post
I shoot the 200 grain North Fork, Nosler Partitions with my .300 winny. I have taken Brown Bear, Elk, Caribou, and many Deer. I also like the 180 grain bullets offered by both. wave Good luck and good shooting.


phurley
 
Posts: 2367 | Location: KY | Registered: 22 September 2004Reply With Quote
one of us
posted Hide Post
quote:
North Fork


Your right I forgot about them, add to my top group above.
 
Posts: 1486 | Location: Idaho | Registered: 28 May 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I'm fond of the Swift A-Frame 200 grain in my .300 H&H....and have even used them in the .30-06.....IMo they're a fantastic bullet.
The Kudu in my signature line was taken with that bullet.

Having said that I'd guess that the Nosler Partition outsells that bullet 100-1


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
When you can find them, 200 gr Lapua Megas are a goog bullet at a good price.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
one of us
posted Hide Post
I have a .300 Jarrett that likes the 200 gr weight best, so that is all I shoot through that rifle. I have shot hundreds of Sierra Gamekings, and they fragment every time. I don't use them any more. The Accubonds worked very well on the one elk I shot with them. Nosler partitions are the standard premium bullet, but not accurate in my rifle. The Barnes TSX has proved to be very accurate in my .300 WSM, and was very impressive on the elk I killed with it this year. I will be using more TSX's.
 
Posts: 866 | Location: Western CO | Registered: 19 February 2004Reply With Quote
one of us
posted Hide Post
Speer has these 200gr Spizer SP Hot Core bullets
The lead is bonded to the copper shell from what I was told. I know Nosler partitions are real good that's what I have loaded for my 300 RUM. Good bullets cost more. These speer bullets are pretty cheap and if as good as what I was told I'll shoot them. Has anybody heard what I heard?
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
one of us
posted Hide Post
Just FYI: The Speer Hot-Cor bullets are not a bonded core bullet.

From Speer's web site:

------------------------------------
SPEER Hot-Cor Bullets
* Available with a variety of nose profiles
* Ternary lead alloy injected molten for improved "grip."
* Profiled jackets for weight retention
* Classic flat base design
Hot-Cor bullets are one of Vernon Speer's greatest contributions to reloading. Accurate and hard-hitting, they have traveled the world's game fields. His idea of pouring molten lead into a jacket was so good we're still doing it over 40 years later. You don't fix what ain't broke. These bullets hold together better because the Hot-Cor process eliminates the lead oxide layer that's found between the core and jacket of conventional "cold core" bullets. Profiled jacket interiors add strength to the bullet shank.

SPEER Trophy Bonded Bear Claw Rifle Bullets
* Retained weights of over 95%
* Fusion Bonded Core
* Solid copper shank
* Weight-forward after expansion
* Protected soft point
Designed by renowned big game hunter Jack Carter, Bear Claw bullets combine deep penetration, maximum and fast expansion, and incredibly high retained weights. The jacket is machined from gilding metal, producing a cavity for a front core, and a solid rear shank for integrity. The front lead core is fusion-bonded to the jacket at high temperatures, creating a true bonded core. The solid rear shank stands up to punishment that destroy lesser bullets. The fusion process leaves the front portion of the jacket soft so Bear Claws expand reliably over a wide range of velocities. The solid shank remains intact for the ultimate in bullet integrity.
------------------------------------


While I think the Hot-Cor process has merit, it doesn't bond the core to the jacket like a true bonded core bullet.

-Bob F.
 
Posts: 3485 | Location: Houston, Texas | Registered: 22 February 2001Reply With Quote
One of Us
Picture of Texasnimrod1960
posted Hide Post
I have settled on a 200 grain Speer Hot-Core in a 30-06 for my Elk hunting.





The early bird gets the worm, but the second mouse gets the cheese!
 
Posts: 35 | Registered: 26 July 2005Reply With Quote
one of us
posted Hide Post
Thanks for the info BFaucett.
I've shot game with Hornady bullets but I guess the hot cores would be just a little better and then there is the premium bullets.
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
One of Us
posted Hide Post
NP's and Speer Grand Slams from a 300 Win Mag.
I have used 200gr Hot Cores in a 06.
 
Posts: 367 | Location: WV | Registered: 06 October 2005Reply With Quote
One of Us
posted Hide Post
I am looking to go to 200 grainers in my 300 weatherby. For Big bears, is the Accubond capable, or is the Barnes XXX the way to go?
 
Posts: 186 | Location: langley,BC | Registered: 07 February 2005Reply With Quote
one of us
posted Hide Post
I have used the 200 gr. Partition exclusively in my .300 Weatherby for the past 11 years. That said, I recently purchased a supply of 200 gr. Barnes Triple Shocks to wring out this winter.
 
Posts: 1244 | Location: Golden, CO | Registered: 05 April 2001Reply With Quote
one of us
posted Hide Post
The 200 gr. Nosler Accubond is the most accurate bullet I've found for use in my .300 Weatherby. I've put three shots into 1.00 inch at 200 yards.

Remington 700 Classic. Bausch & Lomb 3000 3-9x scope in Leupold QR mounts.

Remington brass, Fed 215 primer, 80 gr. of RL22, 3.67" overall length. Crimped lightly with Lee Factory Crimp Die. Average muzzle velocity 2957 f.p.s.


"How's that whole 'hopey-changey' thing working out for ya?"
 
Posts: 5883 | Location: People's Republic of Maryland | Registered: 11 March 2001Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Maxx:
I am looking to go to 200 grainers in my 300 weatherby. For Big bears, is the Accubond capable, or is the Barnes XXX the way to go?


I have mine loaded with Nosler Partitions. And yes the Accubond is capable or if you want to shoot barnes xxx. And Speer has the bear claw.
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
one of us
Picture of Clem
posted Hide Post
I used the 200 gn Nosler Partition in my 300 win mag in Africa. The smallest animal was a Springbok with obvious results and the largest a Zebra at about 250 yards. Never recovered one of them - all complete pass-throughs. Busted through both shoulders on a Gemsbok. As long as it will shoot with acceptable accuracy from your rifle this bullet is adequate for anything you will hunt in North America. Some may say a bit light for the big bears but I would think it capable of this task.

I have also loaded the 200 gn Accubond with slightly better accuracy than the Partitions (in my rifle). I have not hunted with this load from my 300 though. The BC of the 308 cal., 200gn. Accubond is impressive.
 
Posts: 1292 | Location: I'm right here! | Registered: 01 July 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia