THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Need help starting with a 300WSM

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Need help starting with a 300WSM
 Login/Join
 
one of us
posted
I now have rifle, cases, & dies for a Winchester m70 in a brown laminated stock 300 WSM. I have IMR 4350, H4350, H4831 & RL 19. I have Hornady & Sierra Flat base 180's. What would you use to start load development? I plan to load 20 rounds to sight in the rifle & shoot a few groups.. Thanks for sharing your experience.
 
Posts: 1125 | Location: near atlanta,ga,usa | Registered: 26 September 2001Reply With Quote
One of Us
posted Hide Post
Tom, I would start with either one of the 4350s first. If they don't pan out, then go to the RL 19. The Sierras will more than likely will be the most accurate.
Good luck. The WSM is a good one.


"The right to bear arms" insures your right to freedom, free speech, religion, your choice of doctors, etc. ....etc. ....etc....
-----------------------------------one trillion seconds = 31,709 years-------------------
 
Posts: 1521 | Location: Just about anywhere in Texas | Registered: 26 January 2008Reply With Quote
one of us
posted Hide Post
x2. I will add that when I first got mine intended on 165 grain premium bullets. Well, they didn't pan out so well. However, I just found out it the 180 accubond has some good potential and the 200 accubond looks to shoot very well.

Don't be afraid to try different bullet weights. Mine also loves the 110 vmax? Go figure.

Chris
 
Posts: 200 | Location: Belle Plaine, IA USA | Registered: 09 July 2001Reply With Quote
One of Us
Picture of hunt99
posted Hide Post
quote:
Originally posted by tom ga hunter:
I now have rifle, cases, & dies for a Winchester m70 in a brown laminated stock 300 WSM. I have IMR 4350, H4350, H4831 & RL 19. I have Hornady & Sierra Flat base 180's. What would you use to start load development? I plan to load 20 rounds to sight in the rifle & shoot a few groups.. Thanks for sharing your experience.


Find some RL-17 if you can. After messing around with all sorts of 300 WSM combinations, I found that it is worthy of the hype and easily produces velocities over 3000 fps. My final load that shoots sub-MOA is 65.5 gr RL-17, TTSX 180 gr, 2.85 COAL, CCI 250 primers, Win or Fed cases, 3080 fps avg.

Start at 60 gr and work up from there.


I hunt to live and live to hunt!
 
Posts: 299 | Location: Big Sky Country! | Registered: 19 March 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by hunt99:
quote:
Originally posted by tom ga hunter:
I now have rifle, cases, & dies for a Winchester m70 in a brown laminated stock 300 WSM. I have IMR 4350, H4350, H4831 & RL 19. I have Hornady & Sierra Flat base 180's. What would you use to start load development? I plan to load 20 rounds to sight in the rifle & shoot a few groups.. Thanks for sharing your experience.


Find some RL-17 if you can. After messing around with all sorts of 300 WSM combinations, I found that it is worthy of the hype and easily produces velocities over 3000 fps. My final load that shoots sub-MOA is 65.5 gr RL-17, TTSX 180 gr, 2.85 COAL, CCI 250 primers, Win or Fed cases, 3080 fps avg.

Start at 60 gr and work up from there.


I have used many a pound of RL17 and it does mee tthe hype as you suggest. I'm glad to see you found good results with 300WSM and RL17. I am going to give it a shot (pun HA). I found IMR4007SSC superb in a few of my 300WSM's but that is the only use I have for that powder. I'd love to find RL17 working great for my 300WSM's.
 
Posts: 969 | Registered: 13 October 2009Reply With Quote
one of us
Picture of Fjold
posted Hide Post
The best load I have for my 300 WSM is:

300 WSM -Hornady 180 SP Intlck -
IMR 4831 at 64 grains
Rem 9 1/2M primer
OAL of 2.828"
2954 fps at the muzzle
0.6" three shot group at 100 yards.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12735 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
Picture of hunt99
posted Hide Post
quote:


I have used many a pound of RL17 and it does mee tthe hype as you suggest. I'm glad to see you found good results with 300WSM and RL17. I am going to give it a shot (pun HA). I found IMR4007SSC superb in a few of my 300WSM's but that is the only use I have for that powder. I'd love to find RL17 working great for my 300WSM's.


My second best powder for 300 WSM was IMR4007SSC as you found but way short on velocity and not as good for accuracy! Oh FWIW, my rifle is a Kimber Montana, 24" barrel.


I hunt to live and live to hunt!
 
Posts: 299 | Location: Big Sky Country! | Registered: 19 March 2011Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Need help starting with a 300WSM

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia