THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
7 STW bullets for elk
 Login/Join
 
One of Us
posted
Mod 70 Classic. It doesn't shoot 160 Speer Grand Slam or Nosler Part. very well. Shoots 120 Hornady, 140 Sierra Pro Hunter and Hornady 154 Interbelt, real well.
Any experience with the Hornady 154 on elk? Thinking of trying a Hornady 139 GMX or 140 Barnes tipped bullet,to see if they'ell shoot any suggestions?
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
Try some Nosler 162-grain Solid Bases, if you can find some... I think the SBs are as good a controlled expansion bullet as you could ever hope to buy without paying exorbitant prices.

And as much as I love Speer bullets, I had one come apart on a bull, a .277" 150-grain Grand Slam. Use something better: maybe a Swift A-Frame or similar. But I would try to find some SBs first, and if you can't, PM me. I have several boxes.
 
Posts: 4748 | Location: TX | Registered: 01 April 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
the 154 grn interbonds are a great choice


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
I have taken a many animals in BC including elk and Plains game in RSA with 160gr Nosler Accubond in Federal factory load. Very accurate, and excellent bullet performance.
I'm shooting the earlier version of the Remington Sendero ( 26" barrel), and had it rechambered for 7mm STW.
 
Posts: 132 | Location: Fort Nelson, BC | Registered: 19 November 2005Reply With Quote
One of Us
Picture of Rub Line
posted Hide Post
160 gr accubond. archer


-----------------------------------------------------


Do not answer a fool according to his folly, or you yourself will be just like him. Proverbs 26-4


National Rifle Association Life Member

 
Posts: 1992 | Location: WI | Registered: 28 September 2007Reply With Quote
One of Us
posted Hide Post
Another vote for he 160gr Accubond.
 
Posts: 3034 | Location: Colorado | Registered: 01 July 2010Reply With Quote
One of Us
posted Hide Post
Thanks guys. I'll try a box of AccuBonds and if that don't work I'll stay with the 154's.
You can soon buy a new rifle or barrel buying a box of this and that to try, especially when you get into the premium stuff.
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
How about the Federal 160 grain trophy tips ? I used them in my 300 RUM with great results
 
Posts: 130 | Location: PA | Registered: 23 February 2009Reply With Quote
one of us
posted Hide Post
If you ever shoot a 160 grain North Fork, you will stop your search. It is extremely accurate and as tough as the Barnes TSX, which is another good choice. The Nosler Partition can never sneezed at. Good shooting.


phurley
 
Posts: 2349 | Location: KY | Registered: 22 September 2004Reply With Quote
One of Us
Picture of Buglemintoday
posted Hide Post
Thats one caliber id like to own one day


"Let me start off with two words: Made in America"
 
Posts: 3315 | Location: Permian Basin | Registered: 16 December 2006Reply With Quote
one of us
posted Hide Post
For a caliber like the 7mm STW, you need a bullet with absolute structural integrity - in particular at close to warp speed, if you luck into a close shot. If it was me, I would start by trying various versions of the (T)TSX. If that did not work, I'd look at bonded bullets and go as heavy in weight as my rifle would shoot them.

- mike


*********************
The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart
 
Posts: 6653 | Location: Switzerland | Registered: 11 March 2002Reply With Quote
one of us
posted Hide Post
quote:
If you ever shoot a 160 grain North Fork, you will stop your search.

I have no experience with this cartridge but bunches with 140-160 grain .284" bullets in various other 7mm's; all alot more mild-mannered than the ultimate in Warp-Speed Cool-Factor - the 7mm STW.

I've loaded many, many 154 gr. Hornday Interlocks in the 7x57(s), 280 Remington, 7x64 Brenneke, 7x65R & 7mm Remingtom Magnum. Within reasonable range and much less velocity than you'll be pushing them they've delivered the Goods without fault. Actually, great results for vanilla-flavored Cup & Core bullet. I would however be looking to a Bonded-Core bullet-o say, an Interbond from Hornady.

While not exactly Elk sized beasts I've shot Red Deer with that bullet with complete satisfaction.

Like Mike (mho) says though I'd be looking for something a tad more substantial in the structural department, the Swift Scirocco II's are not shabby either if you're looking for something with string-tight trajectory & good weight retention IMO. Don't be put off by the price either - they're packaged in 100's, not 50's.


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
One of Us
Picture of Mighty Peace
posted Hide Post
160gr Accubonds get my vote. 150gr TTSX next for the 7mmSTW
 
Posts: 431 | Location: Alberta | Registered: 02 May 2005Reply With Quote
one of us
Picture of loud-n-boomer
posted Hide Post
I have shot elk and deer with a .280 Remington using the 154-grain Hornadys at ranges from 10 to 350 yards. They worked just fine at a muzzle velocity of 2,800 fps and are my favorite .284 bullet for the .280/7x64/7x65 family of cartridges. I don't know how they would hold together on game at close range at STW velocities, but they performed as well as any of the premium bullets in the cartridges I used them in.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3818 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
one of us
Picture of Andy
posted Hide Post
North Fork, Accubond, Swift in that order. I have shot all three in my 7mm remington with 160 grains going 3070 fps with a bunch of RL15 from 26 inch stainless barrel.

Andy
 
Posts: 1278 | Location: Oregon | Registered: 16 January 2004Reply With Quote
One of Us
posted Hide Post
My buddy uses 154 Hornady on elk and deer both. He's got a .280 and a .308 and he loads the 154 Hornady for both. It seems to work well on elk but so would a 140 TSX, Partition, AB...ect. He just likes them because they're cheap and they work.
 
Posts: 35 | Registered: 15 April 2010Reply With Quote
One of Us
posted Hide Post
160gr Nosler Accubond, out of a 7mm STW.
Muzzle velocity 3475 fps.
Impact 50 yard quartering shot into a large mule deer.
Recovered from the rear ham, just under the skin.



 
Posts: 3034 | Location: Colorado | Registered: 01 July 2010Reply With Quote
One of Us
Picture of Mighty Peace
posted Hide Post
PICTURES SAY a 1000 WORDS

ACCUBONDS !!! Got to love them!!
 
Posts: 431 | Location: Alberta | Registered: 02 May 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia