THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
9.3x57 data needed
 Login/Join
 
one of us
Picture of z1r
posted
Sorry for the multiple posts, but I also posted this in the reloading forum.

Anyone have a links to published data for this round? Or, any data from the load books?

Any help would be much appreciated.

-Z




Aut vincere aut mori
 
Posts: 4865 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
<JOHAN>
posted
z1r

I have some data, send me a pm with your email.

Cheers
/JOHAN
 
Reply With Quote
One of Us
posted Hide Post
Data for the above mentioned cartridge:

http://www.norma.cc Klick on the brittish flag and you will find some data.

http://www.robsoft.nu/databaser_se/laddata/loads.asp?MainID=4 here are some more real life data just scroll down om the large meny until you find 9,3x57

http://www.vihtavuori.fi/ there is a good reference chart for gun powders there ie that will give you a good starting point when comparing the Norma line of powders to others.

Also to remember is that the x57 has about 75-80% of the loads of the x62 so if a min load to the x62 is 58 grains then 43.5-45.6 is a good starting interval for the x57.

Best regards Chris.
 
Posts: 54 | Registered: 20 September 2005Reply With Quote
one of us
posted Hide Post
Just FWI: Also see the thread 9.3x57 load data needed in the Reloading forum.

-Bob F.
 
Posts: 3485 | Location: Houston, Texas | Registered: 22 February 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia