THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Help me Decide..Wood or Synthetic??
Page 1 2 

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Help me Decide..Wood or Synthetic??
 Login/Join
 
one of us
Picture of TC1
posted Hide Post
It's not from a lack of experience, it's quite the opposite. I've been through my plastic phase. If a synthetic rifle makes you feel all warm and fuzzy when you see the chipped paint and scratched plastic, then by all means have at it. It just doesn't do anything for me.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by TC1:

take Ray Atkinson for example. He has been using his wood stocked M70 .300 H&H for the better part of his hunting career. It works flawlessly and never gives him a bit of trouble which happens to reflect my experience with wood stocked rifles as well. I've never seen it but I'm sure it's well worn and full of nicks and dings. I would imagine a lot of the finish is gone but it doesn't matter because the wood is now seasoned so weather doesn't affect the way it shoots anymore. I would imagine it's darker in the grip and forearm area were the oil from his hands has entered the wood. One day if the man ever stops hunting which is doubtful, he can look at that rifle and will remember the different hunts by looking at some of the wear and scars the rifle bares. Sort of a rich piece of personal history and a family heirloom. For me a plastic stocked rifle will never be able to achieve that sort of status. Sure, a wood stocked rifle requires a little more care but I've never had a problem taking care of my stuff.

Sorry about my last post. Didn't mean to be so confrontational.

Terry


I completely agree but there is a difficult transitional phase where a rifle looks nearly new with a couple of dings that hurt. After a few more and the loss of more bluing you get over it.

Every time I look at the barrel of my 9.3 I remember taking a leak against my friends rear wheel and breaking his rear light when I turned away
 
Posts: 2032 | Registered: 05 January 2005Reply With Quote
one of us
Picture of TC1
posted Hide Post
Oh I agree. The 1st year I hunt a new rifle it seems every new little scratch or handling mark it gets I lick the tip of my finger and rub the spot to see if it'll come out. Roll Eyes But then after a few years of hunting the rifle starts to look like it has a little character and you don't seem to mind as much. As long as it's honest wear it doesn't bother me at all. Now I did have a Mannlicher-Schoenauer that fell over on a concrete floor while I was cleaning it out in the garage. It got a really nasty bruise on the forearm that I knew would steam out. After about six months I just couldn't stand to look at it anymore and stripped the stock down and fixed it.


Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
Picture of Flippy
posted Hide Post
quote:
Originally posted by TC1:
Now I did have a Mannlicher-Schoenauer that fell over on a concrete floor while I was cleaning it out in the garage. It got a really nasty bruise on the forearm that I knew would steam out. After about six months I just couldn't stand to look at it anymore and stripped the stock down and fixed it.


Terry
Been there, done that.

---Mike
 
Posts: 1700 | Location: Lurking somewhere around SpringTucky Oregon | Registered: 18 January 2005Reply With Quote
one of us
posted Hide Post
My old 300 H&H is a custom rifle. I built it many years ago, so I do have an advantage there without a doubt. Today some would say it is Stainless steel because it lacks much blue, the stock is dinged an rough and reminesent of driftwood, but it still shoots under an inch, and I have not had to touch the adjustments on it for over 10 years..It is glass bedded as it was not a 300 H&H in its early life, in fact its had several barreled actions in it, but its been a 300 for I guess about 40 years..The stock was my first..

As to plastic, they are not indestructable, I have repaired a bunch of them snapped at the wrist, melted by the camp stove, warped in the heat of a car...Again anything made by man?

Bottom line is it is argueable, so best for folks to make up their own minds and to each his own..I have chosen wood and it works for me and I have used them all over the world. I can say the same for Gumboot except he likes those plastic monsters and they work for him! beer


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of gumboot458
posted Hide Post
If I lived full time in the Artic I would use wood stocks , as dry wood is not very affected by the cold ,,, Seal it up good and have at er .....

Laminate is a nice way to go ,, I sure like the one on my 9.3x64 .....Ther new Ruger and Remington laminated stocks with checkering are very nice IMO ....
Something that chapps me to no end is I can,t buy a duplicate Rem 721 stock in synthetic ...


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
One of Us
posted Hide Post
"...for some reason I think I need a Sythetic stock on it.."

I want wood. But, I think YOU should satisfy YOU, not me!
 
Posts: 1615 | Location: South Western North Carolina | Registered: 16 September 2005Reply With Quote
one of us
posted Hide Post
Lamninates are nice but are heavy. Depends on some of the goals you have for your rig sometimes. I have several rigs that are synthetic to help me achieve the desired weight of that particular rig.

I love the look of wood, and have some Serengeti Laminates that are just beautiful, maybe the best of both worlds.....I like a good stable heavy rig, if I'm not going to have to lug it all over the place--I made the mistake of making a Antelope rig out of laminate, and it's just too damn heavy. Bought an Edge for it and it is the cat's meow now.
 
Posts: 3563 | Location: GA, USA | Registered: 02 August 2004Reply With Quote
One of Us
posted Hide Post
You're going on one hunt, probably for a week. IMHO just keep the stock you have... expect to get wet but I don't see that being an issue in only one week.

If you think this will become an annual trip, or
you hunt in the rain/snow regularly, then I would get a synthetic stock. I put a fiberglas stock on both my .30-06 and my .338WM M-700's, because I do so much hunting in shitty weather. Rain, snow, sleet etc...

Now most of the other guns in my safe have wood stocks and I will carry whatever, during sunny dry days.

But when the shitty weather hits, out come either of those old faithful Remington's.
 
Posts: 828 | Location: Whitecourt, Alberta | Registered: 10 July 2006Reply With Quote
new member
posted Hide Post
Go with wood. Life is too short to hunt with an ugly gun.
 
Posts: 21 | Location: Deep South Texas | Registered: 24 April 2006Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Help me Decide..Wood or Synthetic??

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia