THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Synthetic stock - glass bedding needed?

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: Synthetic stock - glass bedding needed?
 Login/Join
 
one of us
posted
That stock is definately moving. It has moved while the action is screwed to the stock. I don't know if it is rolling or what but it is moving. Another thing, that forearm is not as stiff as would be expected.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
one of us
posted Hide Post
I have an HS stock on a short action 700, unbedded as per their recomendation. Over the last couple of years the forearm has moved to a point were now it is pushing against one side of the barrel. HS says that it is impossible, I can't send the stock back because of that line known as the 49th parrallel. Just unhappy. The bedding block is rough enough to scratch the blueing on the bottom of the reciever as well.

IMO if the stock needs that bedding block, it isn't stiff enough to begin with.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
one of us
Picture of Jay Gorski
posted Hide Post
Chuck, That bedding block runs the entire length of the forearm, give Tod a call, he said he'd help you out, gave him your whole story, Jay
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Synthetic stock - glass bedding needed?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia