I'm sick and tired of the bullsh*t choice of ring heights for the CZ. Despite my plump cheeks, I have high cheek bones and can't get a good weld with the medium rings that everyone makes. Does anyone make a Monte Carlo stock for the CZ?

No, thank goodness, or white line spacers or 45-degree fore end or pistol grip caps.

You might try Talley or Warne rings though.

Rich

In fact I am sure that CZ themselves offer a Monte Carlo option. Just maybe you need to see what stock profiles are available to the European market?



They also make a so-called "Bavarian" chhekpiece model. Like a Greener Rational Stock.

Try:

http://www.czub.cz/en/catalog/...cz/KM/CZ_550_MC.aspx

Unless you bend the handle, mediums are the lowest that you can find.
CZ's "Lux" stock is Bavarian. The Safari Magnums have a "Lux" with schnabel fore-end.
My Brno has a hogback stock and a McMillan non-classic stock may still be available. Otherwise you may need to contact CZ-USA.

Do you have a "American" stock CZ? What you can do is build up the cheek area with layers of moleskin and pull a cartridge carrier over it.

2 cents

Yeah, it's the American stock. I like the looks, but I just can't get down on it. I was thinking of the Winchester stock that had a slightly raised comb on an otherwise straight stock might be the answer, not one of thoses extremely exagerated Monte Carlo stocks from the 60's and 70's.

There's not a straight stock I could tolerate. Neck and arms too long. Good luck!