THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Are there any people out there who would buy 8mm Northfork bullets?

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Are there any people out there who would buy 8mm Northfork bullets?
 Login/Join
 
one of us
posted
After seeing the results of Northfork bullets on this forum I gave Mike a call and asked if he made any 8mm bullets. He said no and I was only the 3rd person to ever ask for them. Who out there would buy a Northfork 8mm bullet that was in the 190-200 grain weight? My vote is in I sure would like to try them.
 
Posts: 60 | Location: Maupin | Registered: 15 May 2002Reply With Quote
<chris_m>
posted
I would be interested in a 220 grain.

Chris
 
Reply With Quote
one of us
posted Hide Post
Count me in.

185-195 gr would be about perfect.

montero
 
Posts: 874 | Location: Madrid-Spain | Registered: 03 July 2000Reply With Quote
one of us
posted Hide Post
I would give them a try.
 
Posts: 257 | Location: Torrance, Ca | Registered: 02 July 2002Reply With Quote
one of us
posted Hide Post
I would buy some in 200 gr and 220 gr weights. - Dan
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
one of us
posted Hide Post
From the number of replies I maybe see what Mike is talking about. There doesn't seem to be very much interest in the 8mm. I think this would be the perfect bullet for my rifle. Come on people we need enough that it could be profitable to make them.
Redside
 
Posts: 60 | Location: Maupin | Registered: 15 May 2002Reply With Quote
one of us
posted Hide Post
Hey Redside,

I would like a 200-220 gr. from North Fork!

Good luck,

Smoker*
 
Posts: 178 | Location: Pennsylvania - USA | Registered: 17 September 2003Reply With Quote
one of us
posted Hide Post
I was one of the people who inquired and was told they had no plans for 8mm. I too would buy 200 and 220 gr. Karl
 
Posts: 214 | Location: Cochrane Alberta Canada | Registered: 22 July 2001Reply With Quote
one of us
posted Hide Post
Looks like we are up to seven of us. I don't think that would be enough to get Mike to tool up. I can always hope with Remington bringing out the 8mm Mauser that maybe more people might want some of these bullets.
 
Posts: 60 | Location: Maupin | Registered: 15 May 2002Reply With Quote
one of us
Picture of Deerdogs
posted Hide Post
I'd try 'em. 200 grains would be fine.
 
Posts: 1978 | Location: UK and UAE | Registered: 19 March 2001Reply With Quote
one of us
posted Hide Post
Hornady has a new 195g bullet out. Why not give them a try? I am going today, to pick up a box I ordered a month ago. I will post results.
 
Posts: 125 | Location: SW Manitoba Canada | Registered: 15 March 2001Reply With Quote
one of us
posted Hide Post
Well I got the 195g Hornady's and tryed them out on paper. It was cold and a 20 mph wind was blowing, but I went out anyway. I tried 4 loads, 1 with Varget and 3 with IMR4064.
IMR4064 FPS Group size
46g 2376-2398 3.5"
47 2467-2519 4"
48 2507-2548 2"
VARGET
47.3 2396-2483 3"
The 48g load of 4064 is 1g over Hornady max, but was showing no sign preasure. I am giving up for now, we are still hunting with muzzleloaders and rifle season starts next week. I am going to use the Hornady 170g rn this season. It shoots 1.5" groups and travels at 2630fps. I am planing on moose hunting next year, so the 195's will get used then.
 
Posts: 125 | Location: SW Manitoba Canada | Registered: 15 March 2001Reply With Quote
one of us
posted Hide Post
I just finished my fall hunting season yesterday shooting a cow elk from 176 yards using the new Hornady 195 grain bullet out of my 3200 Hawk. The cow was exactly broadside, the bullet entered just behind the front shoulder and exited high off the back (I was shooting up hill) no recovered bullet. Muzzle velocity for the 195 was 2900 fps. I could probably get more FPS but it shoots best at this speed.
Redside
 
Posts: 60 | Location: Maupin | Registered: 15 May 2002Reply With Quote
one of us
posted Hide Post
I'd love to see a 210gr, and I don't care who makes it.
 
Posts: 529 | Location: Missouri | Registered: 31 January 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Are there any people out there who would buy 8mm Northfork bullets?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia