THE ACCURATERELOADING.COM BACKPACK HUNTING FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Montana Pitch Blend
 Login/Join
 
one of us
posted
Guys, has anyone used this on their boots for prolonged periods? I want a good waterproofing/dressing that I can apply to my boots that won't ultimately break down the leather or cause damage in any way.
Thanks.

Chuck
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
I have. Its good, but I don't think its any better than SnowSeal or Nikwax.

I use SnowSeal most of the time...have never had any problems with leather breaking down.

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
I keep several pounds of Snowseal and Montana Pitch Blend on hand. Many claim the snowseal does not replenish the leather and if used often may prevent the leather from being replenished by other treatments. I've read/heard reports that this may cause damage. I use it on many things but not on my good leather boots.

The pitch blend seals as well as the snowseal, but, does replenish the leather. Duxbak?? appears to grease/seal the leather a bit better, but, it generally stays too sticky for my taste causing the leather to clogg up w/ dirt and debris.
 
Posts: 1190 | Registered: 11 April 2004Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
quote:
Many claim the snowseal does not replenish the leather and if used often may prevent the leather from being replenished by other treatments. I've read/heard reports that this may cause damage.


I have heard the same thing, but have never had an issue in the field. I have used it on all my leather boots and have gone through multiple soles on them while the uppers remain in good condition. Some of the boots are pushing 15 years old (most don't make it that long though, but I can't blame that on any treatment or lack thereof....forestry work is HARD on boots!).

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
one of us
posted Hide Post
Thanks guys. Has anyone used straight beeswax for waterproofing their boots?
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
one of us
posted Hide Post
Pitchblend is good stuff, but I prefer Obenauf's.

Obenauf's LP is made with beeswax, and repels chemicals as well as water. I used it extensively on my Whites and Nicks with excellent results..even after wearing the boots for long periods of time in wet conditions.

MG
 
Posts: 1029 | Registered: 29 January 2004Reply With Quote
One of Us
Picture of GrosVentreGeorge
posted Hide Post
I usually use Obenauf's on all my boots too. I am in my Danners 10 to 12 hours a day inspecting power lines in all weather and terrain year round. I also use it on my hunting boots with no complaints. If anybody says that MT pitch is better I might give it a try.


"I would rather have a German division in front of me than a French one behind me." -- General George S. Patton
 
Posts: 427 | Location: The Big Sky aka Dodson, MT | Registered: 22 May 2007Reply With Quote
One of Us
Picture of HUNTS
posted Hide Post
I've been using Granger's for the last several years. Much better than Snoseal and Montana Pitch Blend. Lasts much longer. Water never soaks into the leather.

http://www.campmor.com/webapp/wcs/stores/servlet/Produc...43&memberId=12500226
 
Posts: 161 | Location: Bozeman, Montana | Registered: 04 January 2005Reply With Quote
one of us
Picture of jackfish
posted Hide Post
Obenhauf's is the best I've found for my usage. Some in very wet climes swear by pure beeswax gently worked in with a heat gun or hairdryer.


You learn something new everyday whether you want to or not.
 
Posts: 1080 | Location: Western Wisconsin | Registered: 21 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia