Go | New | Find | Notify | Tools | Reply |
One of Us |
I think I like it, but as most liberals , it is important to me what others think. #1) Actually, I was just playing around with Photoshop and I thought it might look cool. I think it does. I figure you could get the cylinder nickel/chrome/NP3 plated for ease of clean-up, and plate the other parts or get them in SS. Jesse | ||
|
One of Us |
Here are two more variants: #2) and #3) What do you think? | |||
|
Moderator |
I like it! I think it looks good two-tone. My .475 is two-tone. "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
one of us |
I like 2 tone, but I don't know if I like that look????? If you're going to make a hole, make it a big one. ΜΟΛΩΝ ΛΑΒΕ Member of the Delaware Destroyers Member Reeders Misfits NRA Life Member ENDOWMENT MEMBER NAHC Life Member DSA Life Member | |||
|
One of Us |
Whitworth, Is your revolver more like #1, 2 or 3? | |||
|
Moderator |
More like two...... All target gray except for the cylinder which is stainless. "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
one of us |
Two tone is not new .Introduced in 1913 the 35 S&W auto cartridge and pistol was available in blue/nickel two tone. | |||
|
One of Us |
I know it's not new, I was just playing around with what might look good on a Blackhawk. Gary Reeder also has quite a few blue/SS pistols. Jesse | |||
|
one of us |
I have a 2 tone by Gary Reeder, my new Reeder is going to be all stainless. If you're going to make a hole, make it a big one. ΜΟΛΩΝ ΛΑΒΕ Member of the Delaware Destroyers Member Reeders Misfits NRA Life Member ENDOWMENT MEMBER NAHC Life Member DSA Life Member | |||
|
One of Us |
I like it! All three are ok by me. MM http://www.youtube.com/watch?v.../watch?v=qVQc386js7g www.setfreesoldiers.com www.soldiermade.com Montana Maddness Set Free Ministries MT. 7 days with out meat makes one Weak! | |||
|
Moderator |
I aplogize in advance for posting this picture again, but here is my two-tone revolver...... "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
No need to apologize. I like it! | |||
|
Moderator |
Thank you sir! It actually looks better now that I have the stainless Ruger scope rings on it. The ones in the photo broke...... "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
Makes me thing twice about using Burris rings on my Ruger #1. | |||
|
Moderator |
Those were Redfields and I sheared off the studs that keep them from moving forward or backwards. What caliber is the No. 1 in? "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
The rings sure fooled me. By the way they mount, I thought they were the Burris model. My Ruger #1 is chambered in .405 Winchester. I will be hunting some Coues with it down here in Arizona in about 3 weeks. Should be a blast. | |||
|
Moderator |
Good luck on your hunt!! I look forward to reading about it and seeing the photos! "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
one of us |
What, no brass?????? I always did like a 3-some. Larry "Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson | |||
|
One of Us |
Here you go Larrys. I wouldn't want to disappoint! | |||
|
Moderator |
Ask and you shall receive........ "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
Whitworth, I had to laugh at that picture. That gun just LOOKS nasty laying there. That metallic blue stainless reflection on hard blue is a tough scheme. RETIRED Taxidermist | |||
|
Moderator |
Why thank you, George! It is nasty and it bites on both ends! I just love that darn revolver! "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
How long is the barrel???Looks to be 10".Case colored frame would look nice!!!! | |||
|
one of us |
Ruger270 I like blued pistols, and I like nickel pistols. Smith&Wesson calls pistols with blue and nickel, Pinto's. I have one "Pinto" but, strangely enough, it is a Colt 1911 with a Nickle frame and Blued slide. I woulds like to have "Pinto", engraved, with Ivory grips, S&W Mod 29 44 Mag as a "BBQ Gun". So, I think your "Pinto" Ruger looks good. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
One of Us |
They all 3 look good to me .. I,m not a brass frame kind of guy . I like #3 hands down the best .... .If it can,t be grown , its gotta be mined .... | |||
|
one of us |
The real question (for me anyway) is "How does it shoot?" My rifles are mostly Savage's. Why? They shoot well out of the box for the price I can pay. Yes, they are ugly, and a few guys at the range laugh when I pull one out, but most stop when they see how they shoot. So for me, the beauty of the tool is in the results. | |||
|
One of Us |
Here's mine. | |||
|
One of Us |
Very, very nice! I love the front band on the Bisley. Who did it? It reminds me of Bowen's work. Jesse | |||
|
one of us |
personaly i like the looks of a in the white cylinder only if the rest of the gun is blued. I also like the look of a polished grip frame on a blued gun if thats all thats not blued. Its all a matter of taste and if you like it how gives a rats ### if someone else does. | |||
|
Moderator |
Very nice, Boxhead!! Let's hear the details. "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
One of Us |
Whitworth- As far as I am concerned you could post that "little" SRH every so often! What is that cylinder made of? Does it need to be hardened? 475 Linebaugh? Sic Semper Tyrannis | |||
|
Moderator |
Thanks Rex Rat! The cylinder is made of 17-4 stainless with an H1000 heat treat while the extractor is heat treated to H900. It is a .475 Linebaugh........ "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
one of us |
Here is my 2-tone. Ruger 45 Colt BlackHawk with Bisley cylinder. Bottom is my Seville in 45 Colt. | |||
|
One of Us |
I REALLY Like my new 2-tone It never lets you forget that you are NOT dirty Harry. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia