I'm wondering if the 9" barrel from outside suppliers fitting the G21 will fit the G41??? Looking at LoneWolfe barrels. Wanted the 9"barrel, threaded to play with. TIA.

quote:

Originally posted by packrattusnongratus:
I'm wondering if the 9" barrel from outside suppliers fitting the G21 will fit the G41??? Looking at LoneWolfe barrels. Wanted the 9"barrel, threaded to play with. TIA.

Of course, Glock lists the barrels separately as the pistols are different lengths. A comparison of the specs for both pistols show the width to be the same.

I would suggest finding someone who has a 21 and try installing the barrel into your 41. That is the only way to know for sure. Look carefully at the cuts around the barrel to make sure they are the same.

Wish I could be of more help to you.

Thanks. I wanted the extra length for more velocity.

Well, I can't be a lot of help, but I just ordered a 9 inch unthreaded and a 6 plus inch threaded for a 40. They are supposed to be drop ins, but you have to check to be sure the chambers aren't too tight.

I just looked on their site and they don't offer a 41 barrel at this time. I don't know if the 21s and the 41s are identical or not but am almost certain they are. But almost is not certain. Call them Monday 208 448 0600.

They probably offer it, but on their site, the 9 inch barrels are UNTHREADED. That's one of the reasons I ordered the 6+ because I wanted to add one of their brakes. Should be here next week, I will report on progress.

Thanks for all your replies. I want the barrel to hunt with this fall. Better get steppin' eh? 255 gr bullets sound like the first thing to try.

Be careful with the heavier weight bullets in semi autos. They will add to the force the slide moves back and forth. Make sure your recoil spring assembly is in good shape. I've had no problems taking deer cleanly with 230 grain bullets from my ACP handguns.