THE ACCURATERELOADING.COM HANDGUN HUNTING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Hunting  Hop To Forums  Handgun Hunting    Xp-100 in 300RUM,338RUM,358,RUm,375RUM

Moderators: MS Hitman
Go
New
Find
Notify
Tools
Reply
  
Xp-100 in 300RUM,338RUM,358,RUm,375RUM
 Login/Join
 
one of us
posted
Thinking of rebarreling a XP to one of these cailbers.I bought another one or might do it with my 300WSM XP.

Any thought on this,barrel life,receiver stress,is the WSM case the max voulme for a 15 inch barrel,bigger case less pressure more velocity.

Don't know,any other things that you can think of that I should look at or worry about.Any ideas???????? Wade
 
Posts: 219 | Location: indiana | Registered: 07 June 2002Reply With Quote
<MontanaMarine>
posted
The Remington Ultra Mag cases are way too long to fit in the XP-100 action.

MM
 
Reply With Quote
one of us
posted Hide Post
Yes I know it is to long to chamber it.But I have a removable bolt stop on the side of the gun.I will have to remove the bolt to get the fired case out.Just like I have to to do to get unfired 30WSM ammo out.

That one was easy,done have that one solved.

Thanks alot any other ideas. Wade
 
Posts: 219 | Location: indiana | Registered: 07 June 2002Reply With Quote
<xp100hunter>
posted
Handcannon,
I made a response on the hunter.com forum

You may want to make this same post on the singleshot pistol forum here @ accuratereloading.
xphunter
 
Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
savage makes their 502 in 300 wsm, right now, $500.

exclenct gun, i've got one in 708 that shoots 1/2 moa or better
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
<JonMudskiper>
posted
I would think putting one of the magnums in a pistol would be a waste because the velocity dropoff from the barrel length. You would be burning a lot of the powder outside the barrel. It might be fun for shooting at night though. Just imagine the fireball.
 
Reply With Quote
<pshooter>
posted
Handcannon, I have a question a bit off the topic if you will entertain me. What kind of muzzle velocity do you currently get with your 300wsm and with what load. I have been talking to Savage about a custom shop Striker with a 15" uncompensated bbl. Any insight will be greatly appreciated. mvm
 
Reply With Quote
<pshooter>
posted


[ 06-19-2002, 05:51: Message edited by: pshooter ]
 
Reply With Quote
one of us
posted Hide Post
Handcannon,

Well friend, I think your even over my level of recoil in the big XP's. From the magnums I have tested in the XP's and Encores, I would say that the WSM or Lazz. short mags are about as large as practical for the 15" barrel.

You may get a bit more velocity with the RUM case but the increase would be very small. Also, with the much longer RUM case, you will loose an extra inch of usable barrel, again reducing velocity. In my opinion the WSM and Lazz short cases are the biggest one should use.

That said, if you choose to use a caliber of say .375" and up, one can use a much larger case. For instance, a 458 RUM would be much more efficient out of a 15" pipe then a 300 RUM. Recoil is another story.

Good Shooting!!!

50
 
Posts: 701 | Location: Fort Shaw, MT | Registered: 09 April 2002Reply With Quote
Moderator
posted Hide Post
Last winter, I saw two XP-100s; one was chambered in .416 Taylor, the other in .458.

The action will take it (I don't know if the stock will); barrel life would be good, since you're not likely to shoot it all that rapidly (or that much).

Go for it! Please let us know how it works out.

George
 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Hunting  Hop To Forums  Handgun Hunting    Xp-100 in 300RUM,338RUM,358,RUm,375RUM

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia