The Accurate Reloading Forums
Any of you try or use the Grizzly Ammo in 475 or 480?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2911043/m/375104229

04 September 2008, 04:04
SAFARIKID
Any of you try or use the Grizzly Ammo in 475 or 480?
They offer 425gr WFNGC .480 at 1200fps and .475 at 1300! Since I dont reload(and dont care to),these may be even a lil better than Buffalo Bores versions?

http://www.grizzlycartridge.com/-strse-43/480-Ruger-425-Grain/Detail.bok


"That's not a knife..THIS is a KNIFE" !
04 September 2008, 04:20
Whitworth
No, Tom, in my opinion the Buffalo Bore offerings are better. I have chronographed some of his ammo and it all ran slower than advertised and the accuracy wasn't anything to write home about. If I didn't reload, I would be shooting nothing but Buffalo Bore ammo..... I have used the 420 grain .475 ammo (1,375 fps over the chron or thereabouts), the 440 grain .475 ammo (very accurate in my Ruger), and the 410 grain .480 ammo which is very accurate as well. Personally I would look no further.......



"Ignorance you can correct, you can't fix stupid." JWP

If stupidity hurt, a lot of people would be walking around screaming.

Semper Fidelis

"Building Carpal Tunnel one round at a time"
04 September 2008, 04:40
N E 450 No2
I too have found Buffalo Bore 475 Linebaugh ammo to be first rate.

I did get some Grizzly ammo for the 475 with the Punch bullet.
I advised them it was for the Freedom Arms, which has a little shorter cylinder than some 475's.

The ammo arrived with the bullets seated in the wron crimping groove, ie too long.


DOUBLE RIFLE SHOOTERS SOCIETY
04 September 2008, 06:56
SAFARIKID
Well,that settles that! Thanks Fellas! thumb patriot


"That's not a knife..THIS is a KNIFE" !