THE ACCURATERELOADING.COM HANDGUN HUNTING FORUM


Moderators: MS Hitman
Go
New
Find
Notify
Tools
Reply
  
The Lee .452 300-grain GC
 Login/Join
 
one of us
Picture of Bill/Oregon
posted
Anyobody shooting this slug in .45 Colt? How do you like it?


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16699 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
one of us
posted Hide Post
I am shooting their 310 gr out of my 44 mag and it works well. I drop them into a 5 gallon pail of water from the mold they well shoot through most any critter.
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
Picture of johnch
posted Hide Post
I used that bullet a few times in 45 Colt loads , on paper .
Shot great .
I casted some up out of 40-1 and used them on deer last year in my Ruger 454 , but the loads were well reduced , 1350 fps

The 2 deer never knew what hit them .

I have water droped WW to use on Boar , but never got to use them .
But they grouped great .

Johnch


NRA life
Delta
Pheasants Forever
DU
Hunt as if your life depended on your results
 
Posts: 591 | Location: NW ,Ohio 10 Min from Ottawa NWR | Registered: 09 January 2005Reply With Quote
one of us
Picture of 475/480
posted Hide Post
Hi Bill,
I have a Lee 300-.452 I will send you free if you want it,I sold my 45"s.
PM me your addy I will send it USPS.

Sean
 
Posts: 562 | Location: Houston Tx | Registered: 23 October 2002Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Sean: What a gentleman! Sent you a PM.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16699 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
one of us
posted Hide Post
Bill, how lucky you are! A great boolit. Lee doesn't make the best moulds but I have not had much of a problem with them. They always replaced any that cast out of round for me. I have never worn one out either. I am a gentle caster and never slam my moulds shut. I give up the few extra boolits to preserve my moulds. Some guys are only interested in slamming them out and getting cans full of boolits in the shortest time. I would rather have 10 perfect boolits then 1000 scrubs and a worn out mould.
 
Posts: 4068 | Location: Bakerton, WV | Registered: 01 September 2003Reply With Quote
one of us
Picture of McClura
posted Hide Post
I use the Lee 300 grn Gas Check in my 45LC Ruger SBH Hunter.
I use 21.5grn of H110. They shoot 1210 fps from my my 7.5" barrel.
Mine were made by one of my buddies.
They will shoot under 2" at 25yds all day.

Mike


You don't quit playing because you get old, you get old when you quit playing.
 
Posts: 311 | Location: Oklahoma | Registered: 17 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia