I need some background info on a Freedom Arms 475 Linebaugh w/6" barrel I looked at today. It is a used gun and the tag says model 757, which is also on the barrel along with the words Field Grade. Gun seems very tight.

When were these made? The gun looked very clean and was priced at $1,299.00 with rubber grips. Is this a good deal? They have had this gun a few months.

Looking for a big gun for fishing/camping etc., any thoughts?

Thanks!!!

Looks like an excellent price if it's not scratched or beatup.
I belive it's still a current production model and caliber.
You could check prices on Gunbroker, I'd bet they are going for much more.

very fair price for a 475. If it were a 454 id would have said its a tad high but the 475 command a bit more money on the used market.

Thanks for the comments.

I didn't know they made that model number. I only see 83's and 97's on their site.

The gun looks very clean.

They also have a field grade 454 with 7.5 inch barrel for the same money. It is very clean also.

If I get off one shot, I want a big hole!

Snapper, for details on the gun's production model etc I'd call FA and ask for the manager. I've talked with him before when considering ordering a new gun and found the folks there real helpful, accessible and easy to talk to. On the gun's value however I agree with checking GB, although keep in mind that it's completed sales prices to go by there and not other figures you see mentioned. Many times they are listed and re-listed repeatedly with no bids.

I've not heard of the 757 either. Maybe an early model?

The Model "757" is the Model 83 in .475 Linebaugh. It is a current production revolver and that is a good price for what you would be getting. I personally would have micartas installed as the Pachmyers tend to remove skin from the web of your palm with the heavy loads.

The good people at FA are indeed a pleasure to deal with and have always been willing to help me.

Thanks guys!

I'm waiting for a call from Freedom Arms right now.

Anything I should look for on a used gun like this? I used a bore light on it and everything seemed OK.

Ask them for permission to shot it before you buy.Then you will know .You can use 480 Ruger to try it out.I have done this at several Gun Shops that had Ranges and have been able to try one before buying.Good luck,thats a mighty fine revolver.

I paid $1800 for a Premiere grade in .475. A field grade at $1275 I would grab in a minute.

I agree with the comment about keeping a smooth grip surface vs. checkering. It is a devastating round if you can settle in and get adjusted to the recoil.

I do not think you are going wrong by getting one. Wade

I own two .475 Linebaughs. Both have custom grips, both are smooth, and they are much larger then the factory grips, since I have large hands.

The stock grips are unshootable for me with heavy loads and this gun.

Bob Baker has an excellent reputation for building quality guns and backing them. He's the owner of FA.

The guns are built like a bank vault. Look at the manual, and be aware they advocate this is a 4 round gun. No round under the hammer.

The triggers are usually very crisp, and around 5 pounds. Original design had to be pretty heavy to set off rifle primers in the 454, with duplex loads.

The trigger can be lowered to between 2.5-3 pounds, if you like that.

Depending on area, that is an excellent deal.

Olbiker has a point. The .480 Ruger loads are fun to shoot, and, at 325 grains, at 1350 fps, are my choice for most of my shooting. The guns were originally designed for Cape buffalo, etc.
and, if you are shooting that stuff, heavy bullets, 420's are the way to go. 420's @ 1350 fps should put you in the 40-45 ft-lbs of recoil area. That's a lot without gloves and properly fitted grips.

GS, who made your grips?
Peter.

quote:

Originally posted by Peter:
GS, who made your grips?
Peter.

JRH Advanced Gunsmithing, Auburn CA made my grips.

Problem with FA grips is the grip maker usually requires the gun to fit the grips. You then end up
paying as much in shipping as you do for the grips, or close.

GS

Why don't you send the grip frame only? Much cheaper and it really is all the grip maker needs.

quote:

Originally posted by Boxhead:
Why don't you send the grip frame only? Much cheaper and it really is all the grip maker needs.

Way too logical!

I would have to agree with the smooth grips. I put a set of herrett grips on mine which had sharp checkering. Forts couple of shots and my hands were raw. Had to San all of the checkering off and has loved them since.
Jm2cw