Welcome to this forum.
Don't mix up apples with pears. .480 Ruger is a short .475 linebaugh a 400 gr bullet at 1200 fps. The recoil is slow but isn't hard.
The .454 Casull a 300 gr bullet at 1730 fps. The recoil is fast and hard.
Both calibers are available in a large range of revolvers with different purchase prices.
Taurus raging Bull (.480 Ruger and .454 Casull) is the most comfortable to shoot because of its grip and a compensator 1.25" on both side. Price is good roughly 750$. 5 shots revolver DA.
Ruger SRH (.480 Ruger and .454 Casull) is not so comfortable to shoot compare with Taurus. It is a great revolver for the price a little bit higher than Taurus price.
6 shots revolver DA.
Uberti only in .454 Casull, a bad copy of FA, with compensator in a cowboy style. 5 shots revolver SA. Price 1000$. Don't like it.
Freedom Arms (.454 Casull and .475 linebaugh), very acurate, in comboy style. shots revolver SA. Mag-na-port compensator in option, high class revolver but higher price too. Roughly 1500$ for Field Grade model and 2000$ for Premier Grade model.
.454 Casull bullet are easy to find. For the rest two great calibers.
------------------
BER007
Keep the faith in any circumstances
------------------------
BBER007@HOTMAIL.COM
------------------
Handgun Hunter
LOVE THOSE .41s'
The 480 was designed to get near 454 performance with far less expense, recoil, blast and need for extreme prescision in manufacture for pressure control. Think of the 480 as a 454 without the grief. The 480 is probably the optimum chambering for the Ruger SRH and the Taurus Raging Bull. It's easier to reload for. It's much more pleasant to shoot, It's easier on the gun and shooter. It makes an even bigger hole in deer than the 454.
Unless you hunt on the ground and cover long distances with a backpack and gun weight and portability is paramount, the 480 in the SRH is probably the best choice.
I'm down to three molds, a 310 LFN, 400 Lee and a 460 WFN gc. The 310 is an outstanding small game bullet @ 700 fps, and at 1000 fps is more accurate then I can shoot it. The 460 is really too heavy of a bullet, but I wanted a gc bullet that would work well in a rifle, it will still do 1050 fps and go into 1" at 25 yds.
Asside from the accuracy of the 480, I'm also pleased with the shootability. I've shot several 454's, 475's and 500's, and honestly cannot handle that level of recoil. The 480 to me is shootable w/o being abusive, though I have rapped my second knuckle several times on the trigger guard.
For me, the 480 Ruger if loaded "hot" would recoil like a 475 Linebaugh. Since I own two 475 Linebaugh revolvers, the 480 Ruger does not really do much for me. I do have an extra cylinder for the 480 Ruger of my FA 475 but have not used it much. I just wish that Ruger would make a 5 shot double action 475 Linebaugh. I suggest that you try out both calibers and pick the one that you like better. Good luck. Ming
Now here is my suggestion the Dan weason 445 supper mag if you hand load you will get about 200 fps faster than a 44 mag you can shoot 44 mag or spec.my cousins 445 6 inch shoots 215 fps faster than my 44 mag in 8 3/8 my load is at the top his can go up 2.5 grains more
duck223 - What gun are you shooting (you mentioned grips)? If you have big hands, you can get the type that covers the backstrap, which really soaks up the recoil. Pachmayr Decelerators work well, as do the ones from Uncle Mike's. I tried some "combat" grips from Eagle with the individual finger grooves on a 45 Blackhawk shooting heavy cast loads, and they try to tear your fingers off. It's best to get a grip that will allow the revolver to roll in your hand when using heavy loads.
R-WEST
------------------
"the spotlight of truth will cause the cockroaches of deceit to run for cover every time"
Rush Limbaugh