Mauser 98 – 3 Position Safety
Part # 983R

A new machined sleeve from Chrome Moly Steel. This safety has the side swing lever like the Classic Winchester M70. A Precision machined unit that is left polished in the white for final finishing. The sleeve has been machined from pre heat treated steel, while the lever has been carefully heat treated and tempered for long life. This allows for low scope use, while retaining the gas deflecting design and shape of the Mauser sleeve. It will upgrade the Mauser 98 and many of its various variations. This Safety will not fit the models 1891, 1893 1894, 1895, 1896, Siamese Mauser, or the Husqvarna Improved Mauser
Positive detents in the lever for the FIRE (forward) safe (middle) positions. The middle position is safe, while allowing the bolt to be opened and the rifle unloaded. Moving the lever all the way to the rear position, (safe) forces the plunger forward which locks the bolt from opening, and puts the lever in the rear SAFE position.
This safety uses the original firing pin, firing pin spring, and cocking piece as well as the old sleeve lock, and spring.
Requires installation by a qualified person, minor machining work is required to the rear of the bolt and the cocking piece for proper installation. Detailed fitting instructions are included with each safety. A spare safety plunger, safety plunger spring, and cross pin are supplied. This Safety is 100% made in the USA, from USA sourced steel.
Also as of Jan 2024, Siamese and HVA safeties are available, inquire
Installation is available, inquire

Cost is $ 190 per safety, plus $ 10 shipping and Insurance

Money Order or Cashiers Check or Personal check to

James Wisner
146 Curtis Hill Rd
Chehalis WA 98532-9106

Cell 360-520-3350

BTT.

Sorry I am unable to post any pics here on AR now since AR became Certified last summer

I do have some new pics of these safeties if someone wanted to post for me, just PM me.

Also I do have these listed on GunBroker for sale, and there you can see the pics

Jim Wisner

BTT

JW

I am hearing these may or may not show up for people - but am posting with fingers crossed:

The way I figured it probably one of the best guys to install the safety is the guy who made it.
Here is a photo of one installed by Jim Wisner on my Mark X barreled action

BTT

Thanks Baxter for posting the pics
Thanks KJK for posting a pic on your action

JW

How much for install and blue?

gunslinger55

PM sent

JW

Monthly bump

JW

BTT 5/6/24
JW

Interested in a price for installed + blued as well. Thank you!

Justin